PCB Piezotronics, Inc.

Product

Microphone Preamplifier

426A05

-

PCB Piezotronics, Inc.

426A05 - PCB Piezotronics, Inc.

Preamplifier for 1/4" side vented prepolarized microphones.

Product

Torque Transducers

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

The technology behind our torque sensors are strain gages. These gages are arranged into a Wheatstone Bridge circuit, which converts the physical, mechanical force into an electrical signal that can be filtered, displayed, and recorded for further processing. This very accurate radiometric electrical signal is proportional to the applied mechanical force.

Product

General Purpose Quartz Force Sensors

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

General purpose force sensors are offered in either stud or axial mounted configurations. They are internally pre-loaded and can be used for dynamic compression, tension, and impact force measurements. Tapped mount­ing holes on both ends of the radial connector style support link, platform, integrated link, and free-standing installations. The axial mounted type offers protection of the electrical connector and sensor cable from potential damage during drop testing and in free-standing installations. Supplied impact caps facilitate impact and drop force measurements.

Product

ICP Blast Pressure Pencil Probe

Model: 137B21B

-

PCB Piezotronics, Inc.

Model: 137B21B - PCB Piezotronics, Inc.

Quartz, free-field, ICP blast pressure pencil probe, 1000 psi, 1 mV/psi, BNC connector

Product

High Temperature

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

PCB® offers specially designed and tested ICP® and charge mode accelerometers for testing in extremely high temperatures.

Product

Conformal Ballistic Pressure Sensor

Model: 117B44

-

PCB Piezotronics, Inc.

Model: 117B44 - PCB Piezotronics, Inc.

Conformal ballistics pressure sensor, 243 Win, 260 Rem, 30-07, 308 Win (7.62 x 51 NATO), 338 Federal, 358 Win, 375 JDJ, 38-40 Winc, 44 S & W Special, 444 Marlin, 7.5 x 54Conformal ballistics pressure sensor for 243 Winchester, 260 Remington, 30-07, 308 Winchester (7.62 x 51), 338 Federal, 358 Winchester, 375 JDJ, 38-40 Winchester, 44 Smith & Wesson Special, 444 Marlin, 7.5 x 54 MAS, and 7 mm -08 Remington caliber cartridges.

Product

Accelerometers

353B15

-

PCB Piezotronics, Inc.

353B15 - PCB Piezotronics, Inc.

Sensitivity: (10 %);10 mV/g 1.02 mV/(m/s) Measurement Range:500 g pk 4905 m/s pk Frequency Range:(5 %)1 to 10000 Hz1 to 10000 Hz Frequency Range:(10 %)0.7 to 18000 Hz 0.7 to 18000 Hz Frequency Range: (3 dB)0.35 to 30000 Hz0.35 to 30000 Hz Resonant Frequency:70 kHz,70 kHz Broadband Resolution (1)0.005 g rms0.05 m/s rmsNon-Linearity:1 %1 % Transverse Sensitivity:5 %5 %

Product

General Purpose Single Axis Accelerometers

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

Motion of a rigid body can be characterized within six degrees of freedom. Providing mechanical excitation to simulate this motion as may be encountered in the real world can entail a variety of test machines. There are various pound/force vibration shakers for structural testing. Regardless of the apparatus, the goal is always to ensure that the product under test can adequately perform, and reliably survive, in the environment in which it will be deployed, or to which it will be exposed during transport. PCB® accelerometers provide the measurement signals needed to control the vibratory input and to analyze the product’s reaction to such testing.

Product

Endevco Cryogenic Charge Output Accelerometers

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

PCB's acquisition of Endevco's full line of testing sensors means all Endevco sensors are now backed by PCB's Total Customer Satisfaction (TCS) guarantee. Endevco® cryogenic piezoelectric accelerometers are built specifically for measuring vibration under cryogenic conditions down to -452° F (-269° C). Signal outputs of these units are very stable even at extremely low temperatures. Their rugged internal construction is designed to withstand multiple cycles of thermal shock with steep temperature gradient. The accelerometers are self-generating devices that require no external power source for operation and contain no electronics. This allows them to operate below the -320° F (-196° C) limit of ICP accelerometers, down to -452° F (-269° C).

Product

Miniature Electrodynamic Shakers

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

Miniature electrodynamic shakers are small, portable units designed to simplify your vibration testing needs. From the SmartShaker™ with an integrated amplifier, to an Inertial Shaker System for testing in hard-to-reach areas, mini shakers offer flexibility when testing. Miniature shaker systems range from 2 lbf (9 N) to 7 lbf (31 N) sine peak force excitation.

Product

Quartz Impact Force Sensors

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

Impact-style sensors are specifically designed for impact force measurements. The sensor is typically mounted in a free-standing manner with the installed impact cap directed toward the oncoming object with which it will collide.

Product

Miniature Triaxial Accelerometers

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

Miniature triaxial accelerometers are available in a variety of sensitivities to suit specific application requirements. These small and lightweight units have a high frequency response and minimize mass loading on test structures. They are ideal for installation in space restricted locations

Product

Microphone System

378B02

-

PCB Piezotronics, Inc.

378B02 - PCB Piezotronics, Inc.

This model includes a 1/2" microphone cartridge, a mated preamplifier with TEDS, and system calibration.

Product

Digital ICP® - USB Signal Conditioner

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

The Digital ICP®-USB Signal Conditioner, Model 485B39, offers plug-and-play connectivity for your measurements. Model 485B39 from The Modal Shop, a wholly owned subsidiary of PCB Piezotronics, is a pocket-sized, dual-channel ICP to USB digital signal conditioner. The unit provides any ICP sensor – accelerometers, microphones, impact hammers, laser tachometers, and more – with a digital USB output. It is truly plug-and-play, with no drivers required. Digital ICP features two BNC inputs and a 24-bit USB digital signal output, allowing a direct connection from the sensor to any PC, tablet, or smartphone device for easy data collection, analysis, and sharing on-the-go.

Product

S-Type Load Cells

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

S-Type load cells are low-cost and high performance side mounted load cells suitable for a number of weighing and general force measurement applications. They come with a 6-foot strain relieved integral cable with pigtail leads that are stripped and tinned for electrical interface.