Product

Dynamic Ultra Micro Hardness Tester

DUH-210/DUH-210S

-

Shimadzu Corp.

DUH-210/DUH-210S - Shimadzu Corp.

A new evaluation system for measuring the material strength of micro regions, such as semiconductors, LSI, ceramics, hard disks, vapor deposited films, and thin coating layers, not addressed by previous hardness testers. It can also be used to evaluate the hardness of plastics and rubbers. This instrument uniquely measures dynamic indentation depth, not the indentation after the test. This in turn permits measurement of very thin films and surface (treatment) layers that are impossible to measure with conventional methods. Additionally, this same method supplies the data needed to calculate elastic modulus on the test specimens.

Product

Ultra High 2.84 (81.00) - 10.00 (283.00) High Performance Lead Free Probe

LFRE-1I35-10

-

ECT

LFRE-1I35-10 - ECT

Current Rating (Amps): 6Average Probe Resistance (mOhm): 10Test Center (mil): 75Test Center (mm): 1.91Full Travel (mil): 250Full Travel (mm): 6.35Recommended Travel (mil): 167Recommended Travel (mm): 4.24Mechanical Life (no of cycles): 500,000Mechanical Life Remark: *Ultra High force products may observe slight decrease in cycle life.Overall Length (mil): 1,300Overall Length (mm): 33.02

Product

L Band Splitter, DC Block All Ports

PD5142

-

INSTOCK Wireless Components, Inc

PD5142 - INSTOCK Wireless Components, Inc

Wideband Frequency (698 - 2700 MHz)Low Insertion Loss (0.4 dB avg)High Port to Port Isolation (30 dB avg)Excellent VSWR (1.10 : 1 avg)50 VDC maximum on DC block portsTri Alloy SMA Female (Jack) Low PIM

Product

Wide Angle Scale Instrument

LS-110 Watt

-

Standard Electric Works Co., Ltd

LS-110 Watt - Standard Electric Works Co., Ltd

LS-110 DUAL Wide Angle Scale meters are combination Digital/Analog indicating instruments. They can be configured to accept ACV, ACA, DCV or DCA, Hz input. Both the digital and analog displays can be modified to represent virtually any scaling or engineering units as required. It utilizes a moving coil type element , 3-1/2 digit display for indication (+ or - 1999 counts).

Product

Ultra Pure Pressure Switch

W117G

-

Whitman Controls

W117G - Whitman Controls

The W117G Ultra Pure Stainless Steel Pressure Switches have all welded stainless steel interiors which are Helium leak checked to pass 4 x 10-9 Std CC/Sec. These switches are used in silicon wafer ovens, numerous medical devices and other applications where even the slightest impurities are not tolerated.

Product

Low Noise Super Wide Band Amplifiers

WBA Series

-

WanTcom Inc.

WBA Series - WanTcom Inc.

WBA series low noise amplifiers have the octave bandwidth from MHz to GHz. With super low noise figure and exceptional low VSWR, WBA series LNA achieves exceptional gain flatness accross octave or multi-octave bandwidth.

Product

Ultra Low-Loss Cable Assemblies

dB Miser

-

Teledyne Storm Microwave

dB Miser - Teledyne Storm Microwave

Cost-Effective, High-Performance Solutions for Low Loss ChallengesConsider dB Miser™ ultra low loss cable assemblies. High performance materials, careful attention to design detail, and stringent process control yields:- Ultra low insertion loss over the specified frequency range- Excellent amplitude stability with flexure- Stable performance over operating temperature range - Increased shielding effectiveness - Greater connector retention​

Product

Dytronic Primary Transfer Ultra Stable Standard

RD-22 Ultra

-

Radian Research, Inc.

RD-22 Ultra - Radian Research, Inc.

The RD-22 Dytronic Primary Transfer Ultra Stable Standard represents the state-of-the-art technology in a commercially available AC transfer reference. The Ultra Stable RD-22 is a variant of the RD-22 Primary Transfer Standard that has been optimized for 120/240 V @ 5A operation to provide optimum stability. In a stable test environment, repeatability for a 10-second test of ±0.6 µWh/VAh is attained at 120 V and 240 V at 5A inputs with a 95% confidence interval. A typical experimental 2 repeatability of less than ±0.25 µWh/VAh is achieved. In a stable test environment, a reproducibility of ±2 µWh/VAh over a five-day interval is attained at 120 V and 240 V at 5A inputs with 95% confidence interval.

Product

VHF Band 1.0 Watt Amplifier With RF Bypass

-

Teledyne RF & Microwave

Teledyne RF & Microwave

Teledyne RF & Microwave has developed a 35 to 350 MHz custom amplifier with 1 watt output power. The amplifier has 29 dB gain with 3 dB noise figure. The amplifier assembly has a RF switch so that the RF input can be connected directly to the output bypassing the amplifier. The amplifier goes into the "bypass" state when the DC bias is removed from the switch. This unit is one of a series of amplifiers that covers the 1 MHz to 2100 MHz with similar operation.

Product

Ultra Rugged Cabinet

M2 Series

-

ELMA Electronic, Inc.

M2 Series - ELMA Electronic, Inc.

M2, Military and Seismic Ready Cabinets have been lab and field tested for use in harsh deployment events. The M2's double walled extrusion offers the highest strength-to-weight ration design available.

Product

Durable, Ultra Small & Flexible Test Assembly

StormFlex® 034

-

Teledyne Storm Microwave

StormFlex® 034 - Teledyne Storm Microwave

Storm Flex® line of flexible cables, the 034 diameter cable offers the same superior mechanical benefits in a new miniature size.Its ruggedness and durability combined with its ultra-small size, very low weight, and extreme flexibility make Storm Flex® 034 cable assemblies the perfect fit for applications such as:- Test & Measurement ~ where flexibility and robustness minimize mating errors.- Systems ~ with complex installation or deployment that can compromise mechanical & RF stability.- Gimbal ~ with requirements for cables operating to 50 GHz.- Digital Test ~ needing minimized stress at the connector to connector interface.- High Density ~ utilizing multi-cable interconnects with centerline spacing as low as 0.07 inches.Storm Flex® 034 cable is also recommended as a semi-rigid replacement in applications where a sem-rigid cable is impractical to deploy and routing may result in assembly breakage or electrical failure.​

Product

Anti-Sulfurated High Power Wide Terminal Chip Resistors

-

Panasonic Industrial Devices Sales Company of America

Panasonic Industrial Devices Sales Company of America

An AEC-Q200 Compliant SeriesPanasonic components specified as AEC-Q200 Compliant are consistently designed into automotive systems. However, today’s Design Engineers are specifying AEC-Q200 components to meet the high-quality standards of devices beyond automotive applications.

Product

6.5" VGA Industrial Monitor With Resistive Touch Control, Direct VGA/DP, And Wide Operating Temperature

FPM-7061T

-

Advantech Co. Ltd.

FPM-7061T - Advantech Co. Ltd.

6.5" VGA TFT LED LCD with 50,000 backlight life timeRobust design with IP66 compliance aluminum front panelWide operating temperature support -20~60°CAnti-glare screen with tempered glassSupports Panel, Wall, Desktop, or VESA arm mountingUSB interface for touchscreen functionOSD control pad on rear coverLockable I/O connectors