Depth
how far down in.
-
Product
Enclosure, G20, Hinged Cover, 12" Depth
410114143
-
Enclosure, G20, Hinged Cover, 12" DepthHousing: Material = .06" Aluminum, Finish = Powder Coat BlackCover(s)/Access Panel(s): Material = .12" Aluminum, Finish = Black Anodize
-
Product
Short-Depth Servers
-
Advantech short depth servers are designed to optimize performance and throughput of 5G, vRAN, MEC and IoT applications at the edge of the network.
-
Product
Enclosure, G10, Hinged Cover, 4" Depth
410112291
-
Enclosure, G10, Hinged Cover, 4" DepthIncludes handles and a hinged cover secured with two 1/4 turn fasteners.Housing: Material = .06" Aluminum, Finish = Powder Coat BlackCover(s)/Access Panel(s): Material = .12" Aluminum, Finish = Black Anodize
-
Product
Enclosure, G12x, Front Mount, 12" Depth
410112849
-
Enclosure, G12x, Front Mount, 12" DepthIncludes hinged cover. Housing: Material = .06" Aluminum, Finish = Powder Coat BlackCover(s)/Access Panel(s): Material = .12" Aluminum, Finish = Black Anodize
-
Product
Enclosure, 9025, Hinged Cover, 8" Depth
410112273
-
Enclosure, 9025, Hinged Cover, 8" DepthHousing: Material = .06" Aluminum, Finish = Powder Coat BlackCover(s)/Access Panel(s): Material = .12" Aluminum, Finish = Black Anodize
-
Product
Enclosure, 9025, Removable Cover, 8" Depth
410112415
-
Housing: Material = .06" Aluminum, Finish = Powder Coat BlackCover(s)/Access Panel(s): Material = .12" Aluminum, Finish = Black Anodize
-
Product
Enclosure, G6, 2 Cable Clamps, 6" Depth (for ITA p/n 410104331)
410112237
-
Enclosure, G6, 2 Cable Clamps, 6" Depth (for ITA p/n 410104331)This aluminum enclosure is for use with G6 ITA Part # 410104331, which does not include the standard removable backshell/housing. The cable clamps are 1" diameter. ITA strain relief is not needed.
-
Product
Enclosure, G18, Hinged Cover, 4" Depth
410112527
-
Enclosure, G18, Hinged Cover, 4" DepthIncludes hinged cover and secured to the ITA by eight #4 socket head cap screws (included).Housing: Material = .06" AluminumCover(s)/Access Panel(s): Material = .12" Aluminum
-
Product
TIRE TREAD DEPTH GAUGE ACCESSORY
MDMAXTPMSTTD
-
*Add-on accessory that allows technician to measure tire tread depth with high accuracy when checking TPMS sensors*In one simple gesture, it can detect worn tires, tire damage and indicate poor alignment with tread depth trigger activation button*Provides a quick vehicle safety check, quickly captures 3 tire measurements (inner, center, outer)
-
Product
Enclosure, G12x, Front Mount, Sloped, 15" Depth
410114003
-
Enclosure, G12x, Front Mount, Sloped, 15" DepthHousing: Material = .06" Aluminum, Finish = Powder Coat BlackCover(s)/Access Panel(s): Material = .12" Aluminum, Finish = Black Anodize
-
Product
4U Front I/O Short Depth Rackmount Chassis
IPC-631
-
4U Front I/O Short Depth Rackmount Chassis for ATX/MicroATX Motherboard
-
Product
Enclosure, G12, Front Mount, 4 Cable Clamps, 12" Depth
410112739
-
Enclosure, G12, Front Mount, 4 Cable Clamps, 12" Depth Includes hinged cover and 4 cable clamps for discrete wiring that provide secure strain relief. With cable clamps in open position- stiffener bar can be removed allowing installation or removal of cables without unplugging patchcords from assembly. Housing: Material = .06" Aluminum, Finish = Powder Coat BlackCover(s)/Access Panel(s): Material = .12" Aluminum, Finish = Black Anodize
-
Product
Enclosure, 9025, Hinged Cover, 15" Depth
410112823
-
Housing: Material = .06" Aluminum, Finish = Powder Coat Black.Cover(s)/Access Panel(s): Material = .12" Aluminum, Finish = Black Anodize.
-
Product
Enclosure, G12, Front Mount, 7" Height, 12" Depth
410112757
-
Enclosure, G12, Front Mount, 7" Height, 12" Depth Includes hinged cover. Housing: Material = .06" Aluminum, Finish = Powder Coat BlackCover(s)/Access Panel(s): Material = .12" Aluminum, Finish = Black Anodize
-
Product
Enclosure, 9050, Hinged Cover, 6" Depth
410112463
-
Enclosure, 9050, Hinged Cover, 6" DepthNot compatible with 9050 ITA frame p/n 410104110 or any older model 9050 ITA frame not matching the current height of 9050 ITA frames of 14.57". Questions? Contact Us before purchase.
-
Product
Enclosure, G18, Hinged Cover, 8" Depth
410112668
-
Enclosure, G18, Hinged Cover, 8" DepthHousing: Material = .06" Aluminum, Finish = Powder Coat BlackCover(s)/Access Panel(s): Material = .12" Aluminum, Finish = Black Anodize
-
Product
Microhardness Tester
MT91 Series
-
Newage Testing Instruments, Inc.
The Newage MT91 System is an automatic microhardness testing system that uses the Rockwell method for the hardness result. Hardness is measured based on the depth of penetration rather than using an optical system to determine hardness based on the impression diameter.
-
Product
Drill Tool Dynamometer
-
Unitech Scales And Measurements Pvt. Ltd
Unitech offers tool dynamometers to measure cutting forces on various machines like lathe, drill, milling machines. All three direction forces are measured simultaneously and displayed. Tool dynamometers are useful to study, analyse the optimum feed, speed and depth of cut on different materials. The dynamometers are also available in various capacities as per customer requirement.
-
Product
24" Rackmount Drawer, Unshielded, 10.5"H x 20"D
DR-102420
-
Unshielded drawers are constructed of 20 ga. CRS and are furnished with ball bearing chassis slides to provide smooth operation. Available for 19" and 24" rackmount in 20", 24" and 30" depths, with or without a keylock
-
Product
Sub-Bottom Profilers
ParaSound Series
-
The ParaSound is the most advanced hull mounted parametric sub-bottom profiler in the market. It utilises the parametric effect to generate a low frequency secondary signal by emitting two primary signals of higher frequencies. In comparison with traditional towed systems the ParaSound family offers very narrow transmission angle and greater positioning accuracy as well as higher operational speed and availability. Our sub-bottom profilers are suitable for operations to depths beyond the continental rise into the abyssal plains and down to the deep ocean trenches.
-
Product
Oscilloscope, 100 MHz, 2 GS/s interleaved, 4 CH, 200 Mpts/Ch interleaved, Fully Loaded DSO with 16 Dig Ch MSO
T3DSO2104HD-MS
-
The T3DSO2000HD series of Bench Oscilloscopes feature 4-channel models with analog bandwidth options of 100 MHz, 200MHz and 350 MHz. The T3DSO2000HD Oscilloscopes use 12-bit high resolution ADCs and a low noise front end which provides an impressive noise performance to cover a wide range of measurement applications. Each model offers a maximum sample rate of 2 GSa/s (interleaved) and a maximum memory depth of 200 Mpts in interleave mode. The MS configured models also include a 16 channel logic probe as standard.
-
Product
Automotive Tablet Oscilloscope
SATO1000 series
-
Shenzhen Micsig Instruments Co., Ltd.
*8-inch TFT-LCD capacitive touch screen with 800 * 600 resolution, interagtes a new generation of hardware & software technologies*High bandwidth, High sampling rate, Large memory depth, excellent signal capture performance
-
Product
Seismometers
3T-120 Pothole
-
120 s to 50 Hz frequency response (option to 100 Hz), 1500 V/ms-1 (2 x 750 V/ms-1) sensitivity, Covers the complete seismic spectrum with a single transfer function, Measured Self noise below the USGS NLNM from 166 s (0.006 Hz), remaining below the high frequency limit of the NLNM at 10 Hz, High linearity: >111 dB (USGS figures), Dynamic range of 167 dB at 1 Hz (Full octave width across 1 Hz), Cross axis rejection over 65 dB; sensor axes orthogonal to within ±0.05°, Remote, automatic electronic mass locking, unlocking and centring, Operating tilt range of ±5° with adjustable feet for off-horizontal installation bases, Low power consumption: 0.75 W from a 10–36 V supply, Stainless steel enclosure, 100 bar / 10 MPa waterproof connector, IP68 - protection against effects of permanent immersion under pressure to 350 m depth
-
Product
Samples Preparation (Polisher/Grinder)
-
* LCD displays all the cutting data.* The diameters of specimens to be cut range from 5 to 8mm (1008:100mm) and the cutting capacity reaches 100x200mm.* Manual cutting and automatic cutting can be changed over at random. * Large cutting chamber & tempered-glass view window.* Non-burnt movable cutting mode which greatly improves cutting quality.● Automatic retract at the end of cutting operation.● Dual-direction feed which increase the depth of cutting.
-
Product
Easy3DLaserLine
-
Single and Dual Laser Line Extraction into a depth mapConvenient and powerful 3D calibration for laser triangulation setupsCompatible with the Coaxlink Quad 3D-LLE frame grabber
-
Product
Ground Penetrating Radar Utility Locator
PinPointR
-
The ImpulseRadar PinPointR offers a clear and dependable way to quickly and easily locate, avoid or map underground utilities with the functionality required to meet approved industry standards, whilst offering market-leading performance and data quality.The enhanced bandwidth of the PinPointR antenna provides resolution beyond that of any single-channel GPR system for the detection of near-surface utility targets and other internal reflectors of interest, as well as deeper utility targets with maximum depth penetration.Key features:- RTS-based Antenna technology- Dual-channel operation- Android-driven interface- Wireless data acquisition- Integrated GPS, with external GPS support- No survey speed limitation
-
Product
19" Rackmount Drawer with Keylock, Unshielded, 8.75"H x 24"D
DR-081924-K
-
Unshielded drawers are constructed of 20 ga. CRS and are furnished with ball bearing chassis slides to provide smooth operation. Available for 19" and 24" rackmount in 20", 24" and 30" depths, with or without a keylock
-
Product
24" Rackmount Drawer, Unshielded, 3.5"H x 24"D
DR-032424-S
-
Unshielded drawers with writing surface are constructed of 20 ga. CRS and are furnished with ball bearing chassis slides to provide smooth operation. Available for 19" and 24" rackmount in 20", 24" and 30" depths, with or without a keylock
-
Product
G12 - 12 Module Solution
-
For maximum versatility and easy access to instrument-side wiring and cable assemblies, VPC offers a selection of slide kits designed to fit most common rack depths. All slides are rated to support 180 lbs (81 kg) to accommodate even the largest fixtures. To order, measure rack depth between mounting rails. With this measurement choose the slide mounting kit that fits the rack. A rack extender kit is available for mounting to racks with recessed rails.
-
Product
Plate Load Test Apparatus
-
These test machine isused to estimate the bearing capacity of a soil under field loading conditions for a specific loading plate and depth of embedment (ASTM) , and also for load tests of soil and flexible pavement components in evaluation and design of airport and highway pavements . We propose a complete range of plate load testing equipment conforming to the different standards.
