Product

Millimeter-Wave Noise Source, Q-band, 33 To 50 GHz

Q347B

-

Keysight Technologies

Q347B - Keysight Technologies

The Q347B waveguide noise source (33 to 50 GHz frequency range), allows you to make accurate noise figure measurements on millimeter-wave devices...

Product

Low Noise Voltage Preamplifier

1201

-

DL Instruments, LLC

1201 - DL Instruments, LLC

The Model 1201 Voltage Preamplifier with Remote Gain Programming Option (06) is usable in both computer controlled and maual applications requiring uncompromising performance.

Product

High-Current, Ultra-Low Noise Filter, 21 V / 500 MA, 10 Ω

N1298A

-

Keysight Technologies

N1298A - Keysight Technologies

The N1298A Series is a collection of low noise filters for the Keysight B2960 Series 6.5-digit low noise source.

Product

High Power Noise Sources

NS-7001

-

Innovative Technical Systems

NS-7001 - Innovative Technical Systems

The NS-7001 is high-power noise source specifically designed to operate in the 2.11-2.17 GHz UMTS band. It features flat output power that is regulated over a wide temperature range with high rejection outside the operating band of interest. Logic control is provided to enable/disable the noise source and an internal BIT function continuously monitors the output power. Other frequency bands and power levels are available.

Product

Phase Noise Measurement Application

N9068A

-

Keysight Technologies

N9068A - Keysight Technologies

One-button measurements for analyzing phase noise in frequency domain (log plot) and time domain (spot frequency)Compatible with phase noise measurement personality in Keysight PSA and ESA spectrum analyzers Runs inside the PXA, MXA, EXA signal analyzers and MXE EMI receiver

Product

Additional Products: High Voltage 50 Pin D-Type Cables - Connector to Connector

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connector to connector cable assemblies below are not compatible with Pickering products, however, are offered for developing a connection solution for use with other products.

Product

USB Smart Noise Source, 10 MHz to 26.5 GHz, Nominal ENR 15 dB

U1831C

-

Keysight Technologies

U1831C - Keysight Technologies

The USB-powered U1831C provides broadband noise figure measurements from 10 MHz – 26.5 GHz with modular signal analyzer and benchtop X-Series signal analyzers.

Product

Permanent Outdoor Noise Monitor

NMS043

-

Larson Davis, Inc.

NMS043 - Larson Davis, Inc.

For permanent and semi-permanent outdoor noise monitoring where remote access is required, the NMS043 is an excellent choice. When you need online access to noise data for monitoring construction noise, nuisance noises, transportation noise or other unwanted noises, the NMS043 will reliably do the job.

Product

Additional Products: 200 Pin D Cables - 200 Pin to 200-Pin

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connector to connector cable assemblies below are not compatible with Pickering products, however, are offered for developing a connection solution for use with other products.

Product

1/2.5" 5.0 MP Low Noise USB Camera (Color)

See3CAM_CU55

-

e-con Systems Inc.

See3CAM_CU55 - e-con Systems Inc.

See3CAM_CU55 is a 5.0MP USB3.1 Gen1 UVC Color Camera with S-mount (also known as M12 board lens) lens holder. It is a two-board solution containing camera sensor board based on 1/2.5" AR0521 image sensor from ON Semiconductor and USB3.1 Gen 1 Interface board. The powerful on-board Image Signal Processor (ISP) brings out the best image quality of this 2.2micron pixel 5MP AR0521 CMOS image sensor making it ideal for next generation of high resolution surveillance, biomedical instruments and biometric authentication applications.

Product

Small, High Performance InGaAs Camera With Low Noise And High Dynamic Range

Wildcat 640 Series

-

Xenics

Wildcat 640 Series - Xenics

The Wildcat 640 series is based on an in-house developed, temperature stabilised InGaAs detector with a 640 x 512 pixel resolution. The Wildcat 640 cameras are offered with high frame rate of up to 220 Hz. The camera comes with a CameraLink or USB3 Vision interface and features low weight and power.

Product

Calibrated Noise Sources

-

Pasternack Enterprises, Inc.

Pasternack Enterprises, Inc.

Calibrated Noise Sources by Pasternack

Product

End of Line Noise Test System

-

ViAcoustics

ViAcoustics

End of Line Noise Test Systems from VIacoustics are designed to support end of line product noise testing on factory floors and quality assurance environments. Using the Limit Analysis features of the Nelson Acoustic Trident software, users can set noise emission maximum, minimum or control range criteria based on Awtd and/or 1/N octave band criteria. Criteria can be customized for most any type of product based on the noise emissions of known good and bad units. The large front panel Pass/Fail indicator allows operators to quickly determine if units meet the criteria. Data on units that fail can be exported for further analysis.

Product

Noise Control And Acoustical Consulting Services

-

Power Acoustics, Inc.

Power Acoustics, Inc.

Our acoustical consultants use the latest and most advanced noise prediction and modeling software, precision sound measurement equipment and detailed acoustical analysis that enable us to help our clients achieve their project's noise requirements and goals. Contact us before your noise challenges become noise pollution problems.

Product

White Light LED Illumination System

pE-300lite

-

CoolLED Ltd.

pE-300lite - CoolLED Ltd.

CoolLED's pE-300liteis a simple white light LED illumination system that offers intense, broad-spectrum LED illumination for imaging most common fluorescent stains. The pE-300lite Light Source can be fitted directly to the microscope or specified with a liquid light guide. The system is a mercury-free alternative that is safer, more controllable, and repeatable than conventional high-pressure gas discharge illuminators. Spectral coverage is from the UV (DAPI excitation) to the Red region (Cy5 excitation). The system is perfect for hospital and regular research laboratory environments and is affordable within consumables budgets.

Product

Particle Impact Noise Detection (PIND) Test

-

Aero Nav Laboratories, Inc.

Aero Nav Laboratories, Inc.

This test detects the presence of free moving particulate contaminants within sealed cavity devices. This test is specifically directed toward relays and other devices where internal mechanism noise makes rejection exclusively by threshold level impractical. This test method also may be used prior to final sealing in the manufacturing sequence as a means of eliminating loose particles from the interior of the device.

Product

Small Device Noise Emission Test System

-

ViAcoustics

ViAcoustics

The Small Device Noise Emission Test System from VIacoustics is a turnkey solution for the measurement of noise emissions of small devices typically used in computers, consumer electronics, appliances and automobiles. The system includes all hardware and software necessary (see the components tab) for the determinations of sound power levels (1/3 octave band and A-weighted), emission sound pressure levels (normalized 1/3 OB, A-weighted and high resolution FFT) and *ISO 532B loudness. The system is designed to be operated by a technician for production level testing or to be used by an engineer in the product development process.

Product

Additional Products: 25 Pin D-Type Cables - Connector to Connector

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connector to connector cable assemblies below are not compatible with Pickering products, however, are offered for developing a connection solution for use with other products.

Product

Full Band Noise Figure and Gain Test Extenders

STG-06-S1

-

ERAVANT

STG-06-S1 - ERAVANT

Full band noise figure and gain test extenders are offered to extend noise and gain measuring capabilities up to higher millimeterwave frequency ranges. These extenders are designed to interface with noise and gain test systems that have an input IF of 10 MHz to 1.6 GHz, such as the industry standard Keysight 8970A/B, N8975A and Maury MT 2075B. The noise figure and gain test extenders include a high-performance, solid-state noise source (STZ series) and a full waveguide down converter (STC series), which consists of a Faraday isolator (STF series), full band mixer (SFB series), frequency multiplier, and IF amplifier. A frequency source with an output signal in the frequency range of 10 to 20 GHz is required as a local oscillator for the down converter. The noise source is automatically powered on and off by the noise figure meter.

Product

Low Noise Op Amplifiers (≤ 10nV/√Hz)

-

Analog Devices Inc.

Analog Devices Inc.

Analog Devices’ portfolio of low noise (≤ 10nV/√Hz) op amps includes many amps with the lowest noise performance in the industry. These high speed, low distortion (1 nV or less) op amps enable better signal fidelity in the most demanding conditions, allowing system designers to achieve the lowest total system noise performance in applications with high source impedances. We feature a considerable variety of these amps with wide supply ranges and low power.

Product

Additional Products: 500 Pin SEARAY Connectors

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connectors below are not compatible with Pickering products, however, are offered for developing a connection solution for use with other products.