Dust
See Also: Sand, Dust Chambers
-
Product
Cable Fault Locator
TX2002
-
Lowest Cost Full Specification Professional Graphical TDR Rugged Palm Top Design 350g (12oz) 5 Measurement Ranges up to 3500m (11,500ft) 50, 75 & 100 ohm Selectable Cable Impedance Built in Tone Generator for Pair Tracing & Identification Suitable for testing all Communications Cables Water & Dust Proof to IP54 Complete with tool-belt holster & test leads
-
Product
Power Meter
-
OrienTek Optical Technology Ltd.
Power Meter and the Visual Fault Locator.The Optical Power Meter can measure dBm,dB and uW in the wavelength band of 850,1300 1310 1490 1550 and 1625nm.The Visual Fault Locator uses CW mode and Modulation mode and helps to detect the optical cable of up to 10km. Battery performance 50 hours operation,Dust and shock proof design,Auto Shut off function.
-
Product
Bearingless encoders
-
Baumer bearingless encoders offer contactless, magnetic and wear-free operation. Their reliable function is not affected by dust, dirt or moisture. They are extremely resistant to shocks and vibrations and have a virtually unlimited lifetime.
-
Product
Installation Safety Testers
VDE 0100
-
PeakTech Prüf- und Messtechnik GmbH
This innovative combination measuring device for testing electrical installations according to official laws convinces with its technical performance data in the high-end area. All important safety tests such as FI, voltage, loop, low-resistance, earth resistance and insulation tests for e-checks and new installations can be carried out safely by the electrician via the large 3.5“ TFT color display. Of course, the device comes with an extensive range of accessories, such as all necessary test leads, adapters, rods and the required software CD for the PC. The device can be charged with a power adapter or via a car adapter. During the daily use, this high-quality device is protected against dust and all-round water jets by its protection class IP 65.
-
Product
Transportable Gas Analyzer
CFP-8000
-
The CFP-8000 is pretreatment unit that is used with CGT-7100 or NOA-7100. When performing continuous gas analysis, dust and moisture must be removed from the gas before sending to the analyzer. This essential preprocessing can be performed by this one device, and two lines of cleaned measurement gas can be used simultaneously. Light-weight and compact, the CFP-8000 is the perfect preprocessor for use with portable analyzers.
-
Product
42.5" Ubiquitous Touch Computer
UTC-542J
-
42.5" Ubiquitous Touch Computer with Intel® Celeron® J6412 Processor. High performance and fanless system design. Built-in Intel® Celeron® J6412 processor. 42.5" monitor with 16:9 widescreen display. IP65-rated front panel for water and dust resistance.
-
Product
42.5" Ubiquitous Touch Computer
UTC-542I
-
42.5" Ubiquitous Touch Computer with 11th Gen Intel® Core™ i7/i5/i3 Processor. High performance and fanless system design. 42.5" monitor with 16:9 widescreen display. Built-in Intel® Core™ i5-1145G7E processor. IP65-rated front panel for water and dust resistance.
-
Product
Industrial Panel Mount Monitors, PCs, and HMIs
-
Explosion- Proof HMIs Corvalent Panel Mount all-in-one system HMIs are water, dust, and explosion-proof. Our Explosion-Proof Industrial HMIs are compliant with IP66, NEMA 4X, and C1D2 standards and are the best solution for environments prone to explosion. -Visio Z15R-XP Explosion-Proof -Visio Z19R-XP Explosion-Proof -Visio Z21.5R-XP Explosion-ProofAll-In-One Industrial HMI Displays Corvalent’s full line of Industrial HMIs is rated IP65 to IP69K, as well as ATEX Marine. These all-in-one HMI systems are available in a wide variety of display sizes, ranging from 7“ to 21.5“.Industrial Panel Monitors Corvalent’s Industrial Panel Monitors are built with the highest quality materials. They are rated ATEX Marine, as well as IP65 to IP69K. Industrial Panel Monitors are available in display sizes ranging from 7” to 21.5”.Industrial Panel PCs Corvalent’s Industrial Panel PCs are built with longevity in mind. They can withstand the stresses an industrial environment places on technology rated IP65 to IP69K and ATEX Marine. -Visio PPC-17RES -Visio PPC-19RES -Visio PPC-21RES -Visio PPC-24PCT
-
Product
Wired Hazard Monitoring
-
Grain dust is extremely volatile and can easily explode with the proper ignition source in confined spaces. OSHA has mandated that grain elevators in Class II, Division 1 environments must have the 3 monitoring sub-systems for elevator safety (1910.272(q)(4)(ii), 1910.272(q)(5), 1910.272(q)(5)).
-
Product
Rotary Switches
-
Reliability and ruggedness are just two of Elma's core competencies for rotary switches and encoders. Panel and shaft sealing up to IP68 against dust and water are standard for all rotary switches. The shaft material for all switches is stainless brass or stainless steel – this is suitable for rugged environments. In order to guarantee years of undisturbed functionality and service life of the rotary switches, all electronic contacts are plated and provided with hard gold. In addition to a large selection of encoders, coding switches, selector switches, audio solutions and multifunctional rotary switches & encoders, Elma Electronic offers you also the right knobs and caps.
-
Product
15.6" Ubiquitous Touch Computer
UTC-515G
-
15.6" Ubiquitous Touch Computer with Intel® Pentium® N4200 processor. Low power consumption and fanless design. Built in Intel® Pentium® N4200 processor. 15.6" monitor with 16:9 widescreen display. IP65-rated front panel for water and dust resistance. All in one aluminum extrusion design.
-
Product
15.6" Ubiquitous Touch Computer
UTC-515H
-
15.6" Ubiquitous Touch Computer with Intel® Core™ i3-8145UE processor. Low power and fanless system design. Built-in Intel® Core™ i3-8145UE processor. 15.6" monitor with 16:9 widescreen display. IP65-rated front panel for water and dust resistance.
-
Product
21.5" Ubiquitous Touch Computer
UTC-520H
-
21.5" Ubiquitous Touch Computer with 8th Gen Intel® Core™ i7/i5/i3 Processor. Low power and fanless system design. Built-in Intel® Core™ i5-8365UE (default). 21.5" monitor with 16:9 widescreen display. IP65-rated front panel for water and dust resistance.
-
Product
Laser Levels
-
Fast, accurate and portable, PLS laser levels save time and money versus traditional layout methods using a bubble vials, plumb bobs or complex measurements. Compare the benefits PLS laser tools: Beam quality will be bright, thin and crisp. Drop tested with water and dust Ingress Protection (IP). Designed for the professional contractor with self-leveling technology. Green Laser Levels, Rotary Lasers, Point Lasers and Line and Combo Lasers.
-
Product
Rotary Torque Measurement System
-
Honeywell Industrial Automation
Honeywell's analogy telemetry rotary torque systems are often well suited for both short and long term testing and monitoring of torque or strain on rotating applications where other measurement methods are affected by vibration, dust, moisture, high RPMs, and large axial/radial shaft movements.
-
Product
Panel PCs
-
Our ruggedized industrial Panel PCs are versatile, cost-effective and compact which offer a host of features that make them ideally suited as the interface between machine and operator in HMI (human machine interface) applications. They are IP65/NEMA4 rated and designed to be housed in a panel or enclosure thereby creating a dust and waterproof barrier which is essential in many industrial and commercial applications. All the Panel PC’s have touch screen capability and there’s also a good selection of expansion options should you need them.
-
Product
7" All-In-One Touch Computer
UTC-307J-IOT
-
7" All-in-One Touch Computer with Intel® Celeron® J6412 processors. Low power and fanless system design. Built-in Intel® Celeron® J6412 (UTC-307J). 7" monitor with 16:9 widescreen display. IP65-rated front panel for water and dust resistance.
-
Product
8 Channel A/D & D/A Zynq UltraScale+ RFSoC Gen 3 Processor - SFF
Model 6353
-
- Small form factor rugged enclosure- Conduction-cooled- Designed to the IP67 specification for dust and water immersion- Sealed military-grade circular connectors- Incorporates Xilinx® Zynq® UltraScale+" RFSoC FPGAs- 16 GB of DDR4 SDRAM- On-board GPS receiver- Optional dual 100 GigE UDP optical interface- Optional fan cooling for benchtop use- Navigator® BSP for software development- Navigator® FDK for custom IP development- Pentek's Quartz Family of Xilinx Zynq UltraScale+ RFSoC FPGA Products Video- Live Signal Acquisition Video: Quartz Model 5950 and Model 6001 RFSoC boards- Pipeline Newsletter: Strategies for Deploying Xilinx's Zync UltraScale+ RFSoC- Please refer to the product datasheet for Installed FPGA IP Module details
-
Product
FD-11637, 8-Channel Strain/Bridge Input Device for FieldDAQ
785641-01
Strain/Bridge Input Module
8-Channel Strain/Bridge Input Device for FieldDAQ - The FD-11637 can measure eight channels and has built-in bridge completion and voltage excitation to support for quarter-, half-, and full-bridge sensors. It also features anti-alias filtering, offset nulling, and shunt calibration to reduce the effect of noise and improve measurement accuracy. The FD-11637 has an ingress protection rating up to IP67 (dust- and water-resistant), can operate in -40 °C to 85 °C environments, and can sustain 100 g shock and 10 grm vibration. The FD-11637 incorporates Time Sensitive Networking (TSN) and features an integrated network switch and built-in power circuitry for simple daisy chaining. You program the FD-11637 with NI-DAQmx, which automatically synchronizes multiple FieldDAQ™ devices. The FD-11637 is ideal for test cell and outdoor environments.
-
Product
Smoke Detection Sensor – 120VAC Wire-In with Battery Backup
ENVIROMUX-SDS-120V
-
For warning of smoke and invisible fire particles. Ionization smoke detector. Applications from 40°F to 100°F (4°C to 38°C). Front loading battery door. 9V battery backup (included) in case of power failure. One button design for easy testing and HUSH mode activation control. LED indicates four modes of operation: standby condition, alarm condition, alarm memory and hush mode. Hush mode: silences false alarms for 8 minutes, or low battery warning for 13 hours. Voltage supply: 120VAC. Pre-stripped wiring harness with tinned strands. Audio alarm: 85dB at 10ft. Dimensions: 5" diameter x 1.75" depth. Dust cover prevents false alarms. Tamper resist feature. Links with up to 24 devices. Max distance between first and last device: 1000ft (305m). Alarm memory indicates initiating alarm in interconnected systems. Use compatible relay (ENVIROMUX-RLY-SDS120V) for connection to the ENVIROMUX system or other auxiliary warning devices such as external sirens or stairwell lighting. ENVIROMUX-RLY-SDS120V includes normally open and normally closed contacts. Contact ratings: 10A at 120VAC, 5A at 30VDC. Regulatory approvals: UL.
-
Product
10.1" Ubiquitous Touch Computer
UTC-310J-IOT
-
10.1" Ubiquitous Touch Computer with Intel® Celeron® J6412 processors. Low power and fanless system design. Built-in Intel® Celeron® J6412. 10.1" monitor with 16:10 widescreen display. IP65-rated front panel for water and dust resistance.
-
Product
Staple Lock Drum Sprays
2801
-
The Parker Conflow Code 2801 - staple lock drum spray provides a superior fluid spraying system for cutting drums in dust supression applications
-
Product
15"/17"/19"/21.5"/23.8"/27.0" Standalone Industrial Touch Monitor
IM Series
Industrial Monitor
- 15"/17"/19" (Fullscreen) 21.5"/23.8"/27.0" (Widescreen) LCD (robust panel direct from AUO)- 10-point PCAP touchscreen (glove-use available)- Anti-fingerprint surface treatment for ease of cleaning and enhanced readability- Wide viewing angles support for both portrait and landscape modes- IP 65 rating for water and dust protection- Value-added service (flexible customization)- VESA/ Desktop Stand- High brightness (H) version / Digital Imaging and Communications in Medicine (DICOM) (D) version
-
Product
Mini Single Flat Venturi
5102
-
Parker Conflow’s Code 5102 is a single flat Venturi, which provides directional air movement with a compact spray head for improved ventilation for cutting machines in mining, conveyor belts or chutes in dust suppression applications.
-
Product
Dust Monitoring System
CDMS-1000
-
CDMS-1000 is designed with light scattering technology for continuous real-time measurement of particulate concentration along with noise and meteorological parameters. This combination consists of a particle analyzer, camera, sound level meter, and GPRS module.
-
Product
Self-contained Photoelectric Sensors
PZ-V/M Series
-
Automatic Calibration Photoelectric Sensors. Detections are unaffected by variations in target color or angle. Excellent resistance to dust and dirt. One touch, fully automatic calibration. Unaffected by highly reflective target backgrounds. 40 model variations available including quick disconnect types. High-power red LED(Except for PZ-M71/V71)
-
Product
Slide Gate & Shaft Position
-
All six Shaft Angle Position Feedback Monitors in the SG1000 Series utilize absolute rotary encoders to provide independent and accurate feedback of a slide gate's or a valve's position to an external device such as a PLC or optional PM500 Process Meter Display Unit. Models are housed in a rugged, Explosion-Proof/Dust-Ignition Proof cast aluminum enclosure that is dirt, dust, grease-proof, and water resistant. In the case of a power failure, all SG1000s are designed to retain accurate gate position.
-
Product
Walk in Chamber for Sand Dust-proof Test
-
Guangdong Bell Experiment Equipment Co.,Ltd
DGBELL Walk in dust-proof test chamber provide a simulated sand blowing and dusting environment. It can continuous operation for a long time without failure.
-
Product
Reed Switch Thermostat
-
Is a versatilemillivolt control utilizing a hermetically sealed (dust proof)reed switch operated by a magnet attached toa coiled bimetal. This design provides snap actionoperation making precise leveling of the thermostatduring installation unnecessary.
-
Product
Miller 400A
44500
-
Rugged, lightweight case - safe to use on wet ground. Weatherproof, even with lid removed - IP67 rating for dust and water intrusion. Convenient case lid removal for ease of movement, with test leads attached, to new measurement locations. Resistance measurement range from 0.01Ω to 1.1MΩ . Resistance measurements are unaffected by any stray interference signals that may be present in the earth during readings, due to the use of narrow band-pass filters centered at 97Hz (the unit’s operating frequency). Runs on a set of C-cell alkaline batteries...no need to periodically recharge the unit or to plug it into a power source
