PD Monitor
-
Product
Portable PD Diagnostics System
PD-TaD 60
-
The PD TaD 60 portable PD Diagnostics system is used in combination with a BAUR VLF generator frida for carrying out partial discharge measurement and location.* Comprehensive 360° cable analysis – with parallel partial discharge and dissipation factor measurement* Time-optimised and safe cable condition evaluation* The lightest and most compact PD measuring device up to 60 kVpeak* Developed for portable use on site
-
Product
6.5" VGA Industrial Monitor With Resistive Touch Control, Direct VGA/DP, And Wide Operating Temperature
FPM-7061T
-
6.5" VGA TFT LED LCD with 50,000 backlight life timeRobust design with IP66 compliance aluminum front panelWide operating temperature support -20~60°CAnti-glare screen with tempered glassSupports Panel, Wall, Desktop, or VESA arm mountingUSB interface for touchscreen functionOSD control pad on rear coverLockable I/O connectors
-
Product
Surface Contamination Monitor
IMI Inspector Alert™ V2
-
The IMI Inspector Alert™ V2 measures alpha, beta, gamma and x-radiation using a 2-inch “pancake” GM detector with high sensitivity to common beta and alpha sources. The easy-to-read digital display shows readings in your choice of µSv/hr, mR/hr, CPM, or CPS. The Total/Timer feature allows timed readings from one minute to 40 hours for precise measurement of low level contamination. An audible alert sounds when the radiation reaches a user-adjustable level.
-
Product
Waveform Monitors
LV5600
-
The LV5600 is a hybrid-type waveform monitor compatible with 4K/HD/SD SDI signal and IP signal.
-
Product
Gas Monitor
Ultima® XIR
-
The microprocessor-based, infrared Ultima XIR gas detector is precisely engineered to continuously monitor for combustible gases and vapors. The unit features DuraSource Technology, which offers improved IR life, and a HART port for easy output access.
-
Product
Ground Fault Monitors
IFT
-
In most industrial settings, ground faults can cause significant damage. Since these leaks are unavoidable in almost all industrial environments, our ground fault monitors allow you to quickly and easily find the source of the leak before a major problem occurs and damages your equipment. The IFT-120 is designed to help you rapidly locate ground faults.
-
Product
17" SXGA Industrial Monitor With Resistive Touch Control, Direct VGA, DP Ports, And 304 Stainless Steel Front Bezel
FPM-817S
-
17" SXGA TFT LED LCD with 50K backlight lifetimeRobust design with 304 stainless steel front bezel and anti-rust coated SPCC rear coverWide operating temperature range (-20 ~ 60 °C/-4 ~ 140 °F)Increased reliability with enhanced 5-wire resistive touch sensorAnti-glare screen with tempered glass and IP66-certified front panelDirect VGA & DP video input interfaceOSD control pad with lockable function on rear panelSupports panel, VESA, wall, desktop, and stand mounting
-
Product
Industrial Panel Mount Monitors, PCs, and HMIs
-
Explosion- Proof HMIs Corvalent Panel Mount all-in-one system HMIs are water, dust, and explosion-proof. Our Explosion-Proof Industrial HMIs are compliant with IP66, NEMA 4X, and C1D2 standards and are the best solution for environments prone to explosion. -Visio Z15R-XP Explosion-Proof -Visio Z19R-XP Explosion-Proof -Visio Z21.5R-XP Explosion-ProofAll-In-One Industrial HMI Displays Corvalent’s full line of Industrial HMIs is rated IP65 to IP69K, as well as ATEX Marine. These all-in-one HMI systems are available in a wide variety of display sizes, ranging from 7“ to 21.5“.Industrial Panel Monitors Corvalent’s Industrial Panel Monitors are built with the highest quality materials. They are rated ATEX Marine, as well as IP65 to IP69K. Industrial Panel Monitors are available in display sizes ranging from 7” to 21.5”.Industrial Panel PCs Corvalent’s Industrial Panel PCs are built with longevity in mind. They can withstand the stresses an industrial environment places on technology rated IP65 to IP69K and ATEX Marine. -Visio PPC-17RES -Visio PPC-19RES -Visio PPC-21RES -Visio PPC-24PCT
-
Product
24/7 Monitoring
-
Provides a centralized overview of the Service Availability and Video Quality throughout all the strategic stages of the media processing & delivery flow.
-
Product
Indoor Air Quality Monitor and Controller
VAT930-CO2/VAT930-CO2-VOC88
-
Shanghai Yi Hua V&A Instrument Co., Ltd. CO.,LTD
indoor air quality monitor and controller ( temperature meter. humidity meter . CO2 meter.VOC meter).
-
Product
Acoustic Wave (Acoustic Emission) Monitoring Solutions
-
Qingcheng offers a variety of solutions to solve some essential difficulties and problems in some industrial fields.
-
Product
PXI Test System Dev, Debug & Monitor Software
InstrumentStudio
-
InstrumentStudio is free application software that provides an integrated approach to interactive PXI measurements. InstrumentStudio helps you to unify your display, export instrument configurations to code, and monitor and debug your automated test system. You can view data on unified displays with large, high-resolution monitors, and then capture multi-instrument screenshots and measurement results.
-
Product
In-Situ Spectroscopic Ellipsometer for Real-Time Thin Film Monitoring
UVISEL Plus In-Situ
-
The UVISEL Plus in-situ spectroscopic ellipsometer can be easily mounted on process chambers (PECVD, MOCVD, sputter, evaporation, ALD, MBE) for the real-time control of thin film deposition or etch processes.The UVISEL Plus in-situ provides the unique combinations of very high speed, sensitivity, dynamic range and accuracy making the instrument able to control deposition / etch at the atomic layer thickness level, even for rapid processes.
-
Product
Real User Monitoring
-
Use real website visitor data to optimize actual website speed, performance, and experience.
-
Product
Tool and Process Monitoring
BK MIKRO
-
BK Mikro is typically used as a broken tool detection system but can also be used for many other applications such as object inspection, position recognition and checking for part defects. The selection of the scanner and controller for broken tool detection systems is mainly application based. Follow the links below to explore specific models or contact us with application questions about our broken tool detection systems.
-
Product
Battery Monitoring System
S5
-
BTECH's benchmark product designed for a wide variety of applications (UPS/Telco/Switchgear), the S5 can collect data from any battery type including cells with the highest amp hour rating (4000+), and the S5 systems will record all battery parameters.
-
Product
Thermalert Clinical Monitoring Thermometer
TH-8/AOP
-
The TH-8/AOP is one of our most economical precision thermometers in the Physitemp product line. The TH-8 offers the same high accuracy (0.1°C ±1 digit) and resolution as all our other thermometers, but with a narrow temperature range. The TH-8 has a temperature range 0f -10 to +60°C with 3 probe inputs. The TH-8 is also switchable from celsius to Fahrenheit. The TH-8 is ideally suited for either a laboratory or hospital setting where continuous temperature readings within the physiological range are sufficient.
-
Product
PD Pipe & Cable Locator
PD / PD-H
-
Audio frequency 750cpsMaximum 100v outputFine Tune knob and LED's to easily match maximum impedanceInterrupter feature on oscillatorLCD meter on receiverReceiver loud speaker or headset useHoliday detection on buried pipe (PD/H)
-
-
Product
Multi Monitor
LV 5770A
-
The LV 5770A is a multi monitor that can be customized with a variety of units to meet your needs.The LV 5770A is highly cost effective because it supports full-format 3G-SDI, HD dual link, HD-SDI, and SD-SDI signals. The LV 5770A has a variety of features including simultaneous monitoring of two SDI signals, SDI signal frame capture, lipsync measurement, Pic Moni Output, and improved flexibility in laying out the display, all of which provide you with leading-edge technology.
-
Product
PDS Pile Driving Software
-
Teledyne PDS customers can now use the high-performance software for Pile Driving applications, including guidance and monitoring, which will reduce production time significantly.A pile data file with pre-engineering information (such as position and orientation information) is used as guidance during real time operations. The operator selects the pile to be placed and Teledyne PDS then expertly interprets the environment and will display all relevant information to the user.
-
Product
Spectrum Monitoring Software
-
A comprehensive set of tools for spectrum monitoring, interference analysis, signal identification and geolocation
-
Product
PDS Multibeam Survey & Processing/Charting
-
Teledyne PDS for Multibeam Surveys provides the functionality for survey planning, data acquisition, data processing, editing, volume calculations and chart production. This turnkey solution offers the surveyor and helmsman a strong tool to carry out the multibeam survey efficiently. Progress is shown real time in top, profile, and 3D views using a color-coded digital terrain model (DTM). Various filter settings can be applied to the multibeam data online, thus providing real-time data processing. Quality control displays reassure the operators that the data is of the desired quality.
-
Product
Ambient Air Quality Monitoring Systems (AAQMS)
-
TML's low level air quality monitoring systems are custom designed to meet our customer's ambient air monitoring requirements.
-
Product
Robust DIN-rail Fanless Embedded System With Intel® Celeron® Processor N3060/N3160, 2 COM, 4 USB, 2 GbE LAN (1 PoE PD), DIO And RTC
ICO310
-
The ICO310, a robust din-rail IIoT (Industrial IoT) embedded platform, supports low power Braswell Intel® Celeron® processor N3060 1.6 GHz dual-core or N3160 1.6 GHz quad-core with up to 8GB DDR3L system memory, delivering high performance and low power consumption at competitive price. The outstanding Braswell Intel® Celeron® SoC-based embedded field controller offers complete expandability and full featured I/O, including two Gigabit LAN ports, two RS-232/422/485 ports, two USB 2.0 ports, two USB 3.0 ports, one VGA port, and one DIO interface. Two PCI Express Mini Card slots, one SIM card slot and three internal antennas are available for 3G/GPRS and Wi-Fi connections. Furthermore, the ICO310 features PoE PD function, which can simplify network installation and minimize the total costs of replacement and maintenance. Its storage interfaces include an SATA SDD, as well as mSATA support on the PCI Express Mini Card slot. Additionally, the wide range 12V-24V DC terminal block power input with overvoltage and reverse protection can lower the risk of data loss under human manipulation. The reliable yet robust ICO310 is a perfect solution for industrial IoT applications such as smart energy, smart factory automation, facility monitoring systems and many more.
-
Product
Automatic Total Nitrogen/Phosphorus Monitoring
TPNA-500
-
More than 10 years have passed since the 5th Water Use Regulation was enforced in 2001. From the perspective on preservation of ambient water quality, it has become a matter of course for companies to be compliant with regulations and observe corporate compliance. Total nitrogen and total phosphorus monitoring in the future has the potential to lead to proactive enhancement of corporate value, in addition to compliance with regulations. While we propose technological innovations and improvements and LCC*1 reductions, we will pursue the future where regulations are strictly observed and corporate value is improved through monitoring.
-
Product
Power Monitoring Software
-
A digital tool that continuously tracks, analyzes, and manages a facility's electrical system in real-time.
-
Product
Environmental Monitors
-
The tools and techniques designed to observe an environment, characterize its quality, and establish environmental parameters, for the purpose of accurately quantifying the impact an activity has on an environment.
-
Product
Automated Monitoring of Airborne Molecular Contamination
AMC-Monitor T-1000
-
The all-in-one analyzer for FOUP, fab and clean-room environment AMC monitoring in the semiconductor industry. The AMC-Monitor is a modular and flexible platform for airborne molecular contaminations (AMC) monitoring in semiconductor applications such as: FOUP analysis with a focus on VOC and condensables incl. full integration with Pfeiffer Vacuum APA 302 pod analyzer. Clean-room monitoring in fabrication plants.
-
Product
Monitoring
-
DVB-C, DVB-T/T2, DVB-S/S2 and Analog TV remote monitoring. DAB and FM Monitor permanently monitor the quality of DAB/DAB+, analog FM and RDS signal.
