Product

Fiber Optic Loopback

LC/SC/MTRJ

-

Huihong Fiber Inc

LC/SC/MTRJ - Huihong Fiber Inc

Fiber Loopbacks is designed to provide a media of return patch for a fiber optic signal; typically it is used for fiber optic testing applications or network restorations. For the testing applications, the loopback signal is used for diagnosing a problem. Sending a loopback test to network equipment, one at a time, is a technique for isolating a problem.

Product

FTTH Optical Node

SFT3908

-

Hangzhou Softel Optic Co., Ltd.

SFT3908 - Hangzhou Softel Optic Co., Ltd.

- Support 8 tuners (DVB-S/S2/S2X) input; 1 U chassis optional for 1/2/3 cards maximum for 8/16/24 tunerinput; Each tuner card are working independently with its NMS and 1 GE Data port  - 8 MPTS (8MPTS out thru bypassing) under Passthrough mode over UDP/RTP thru Data port,unicast/multicast-Version 1 -2 MPTS out after multiplexing or 512 SPTS out switchable under Mux mode over UDP/RTP thru Data port, unicast/multicast-Version 2-Up to 256 PIDs remapping per output channel(Mux mode only) - Support PID re-mapping and pass-through(Mux mode only) - Support Diseqc function(Mux mode only) - Support Biss decryption, each tuner support maximum 64 BISS key decryption (Mux mode) - Web-based NMS management

Product

Optical Wavelength Meter

-

Optoplex Corporation

Optoplex Corporation

Optoplex Optical wavelength meter (OWM) uses proprietary thin-film interference filter in conjunction with Fabry-Perot cavity technology combined with a micro-actuator and high-speed electronics. Its working principle is schematically shown below. By comparison with Optical channel monitor / Optical performance monitor, the proprietary wavelength reference unit is introduced to ensure high precision wavelength measurements. Optoplex Optical wavelength meter is the only DWDM wavelength meter capable of measuring wavelengths of multi-lasers in DWDM networks over C-band and L-band wavelength range with a high accuracy better than that the wavelength locker can provide. For example, the device can simultaneously report 80 wavelength values of 80 channels at 50 GHz channel spacing with the wavelength accuracy ± 2 GHz. DPRAM, RS-232, or USB interfaces are available and OWM can be customized to meet specific requirements.

Product

950~2400MHz DVB-S 4 Ways SAT-IF & 1 Way CATV DWDM Optical Transmitter & Receiver

HDBS-5000DW

-

Hangzhou Huatai Optic Tech. Co., Ltd.

HDBS-5000DW - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai HDBS-5000DW series is putting C-Band ITU standard wavelength 4 SAT-IF and 1 CATV transmitter or optical receiver into a 1RU 19" standard chassis. Multiplexing 5 optic (TX) or de-multiplexing (RX) through DWDM, and transmit in one fiber. Can be used for high-quality transmission of the same satellite VL, VH, HL, HH different polarization of the 4-way SAT-IF signals and 1 way CATV signals. Installation flexibility.

Product

Digital Video/Audio/Data Optical Transceiver

OD3000A

-

Hangzhou Huatai Optic Tech. Co., Ltd.

OD3000A - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai OD3000A digital series optical transceiver, adopts digital video coding technique and WDM technique to satisfied user's multipath digital video, audio, data, ethernet's long distant high quality optical fiber transmission because of its full-found. Product including single fiber one way digital video, single fiber 64 routes video, 128 routes audio and data uni-direction and bi-direction complication. OD3000A can transmit the camera audio/video signal, camera and tripod head control data as well as other control function to central control room from remote end by optical fiber. It can be widely used in the remote monitoring, video conference, video medical ， remote education and other systems of public road, traffic, industrial and mining, community ect.

Product

Optical Tensiometers

Theta Lite

-

Biolin Scientific

Theta Lite - Biolin Scientific

Theta Lite is a compact and accurate contact angle meter for simple measurements of contact angle and surface free energy. It also measures surface and interfacial tension.

Product

Optical Tables Featuring Dual Tuned Dampers for Enhanced Performance

5200 Series

-

Kinetic Systems, Inc.

5200 Series - Kinetic Systems, Inc.

The 5200 Series offers the same 1/16″ thick ferromagnetic stainless steel tabletop and precision construction as the 5300 Series, with a combination of dual-tuned damping and broadband damping for comprehensive vibration absorption. To protect against leaks and spills, the SPILLPRUF® configuration provides a safety barrier between the top skin and honeycomb interior.

Product

3D Automated Optical Inspection Systems

New 3Di Series

-

Saki Corporation

New 3Di Series - Saki Corporation

To handle today’s rapidly changing market trends, the system can handle complex inspection challenges such as high component mounting density areas containing highly miniaturized parts placed near much larger and taller component. With our new 3D AOI system, you can strengthen quality assurance and increase production efficiency.

Product

950~2400MHz DVB-S 4 ways SAT-IF & 1 way CATV CWDM Optical Transmitter & Receiver

HDBS-5000CW

-

Hangzhou Huatai Optic Tech. Co., Ltd.

HDBS-5000CW - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai HDBS-5000CW series combines 4 units SAT-IF optical transmitters and 1 unit CATV optical transmitter, or SAT-IF optical receivers that has CWDM standard wavelength into one housing. The built-in CWDM Multiplexing or De-multiplexing the 5-way optic, and transmit via one single fiber, which can transmit four-way SAT-IF signal of VL, VH, HL HH four polarizations and one-way CATV signal in one satellite with a high quality, flexible to install and convenient to use.

Product

Near-Field Scanning Optical Microscope Platform

MoScan-F

-

CDP Systems Corp.

MoScan-F - CDP Systems Corp.

MoScan-F is a device that enables you to get the best up-to-date available spatial optical resolution using the near field scanning optical microscope (NSOM) principle

Product

Water quality profiler with optical fast DO sensor

AAQ-RINKO

-

JFE Advantech Co., Ltd.

AAQ-RINKO - JFE Advantech Co., Ltd.

The water quality profiler, AAQ 1183 has been redesigned as AAQ-RINKO with an optical fast response (63% response in water, 0.4 s) DO sensor, RINKO. Conventional water quality profilers with a slow response DO sensor require holding the instrument for a certain period at the measurement depths. AAQ-RINKO makes vertical measurements possible with a profiling speed of 0.5 m/s, similar to CTD observation, thereby significantly reducing the observation time. In addition to conductivity, temperature, depth, chlorophyll, turbidity, DO and pH, AAQ-RINKO also enables simultaneous installation of PAR (Photosynthetic Available Radiation) and ORP (Oxidation Reduction Potential) sensors. The processing unit is available in three types in accordance with the observation applications.

Product

Optical Fibers and Modules

-

NKT Photonics A/S

NKT Photonics A/S

Optical fibers are at the heart of everything we do. We embed as many functions as possible directly into the fibers to make systems based on our fibers simpler, cheaper, and more reliable.

Product

Fiber Optic Extensometer

-

OpSens Solutions Inc.

OpSens Solutions Inc.

Versatile and reliable fiber optic extensometer. Designed for harsh environment, these multipurpose extensometers are packaged to fit the challenging environment of any structure monitoring applications.

Product

Ethernet To Fiber Optic Converters (Point To Point)

-

CommFront Communications

CommFront Communications

Our rugged, industrial-grade, point-to-point Fast and Gigabit Ethernet to fiber optic converters work in pairs to extend 10/100/1000M Ethernet signals over long distance. These Fast and Gigabit Ethernet to fiber optic converters have been designed for harsh industrial environments and withstand a wide temperature of -40°F to 185°F (-40°C to 85°C), and they come with the options of multi-mode and single-mode, and ST, SC, FC, and SFP connectors.

Product

Full-function Top-class Self-heal Circle AGC Optical Receiver

HR9236, HR9253

-

Hangzhou Huatai Optic Tech. Co., Ltd.

HR9236, HR9253 - Hangzhou Huatai Optic Tech. Co., Ltd.

Guangtai HR9236, HR9253 builds in two ways optical receiving. When one way is out of work, it will automatically switch into the other way that is heat backup circle design. This series products adopt full-function and top-class designation, so it is suitable for high-end subscribers.

Product

Optical Fiber Identifier

-

OrienTek Optical Technology Ltd.

OrienTek Optical Technology Ltd.

Optocal Fiber Identifier Economical Solution for Integrated Fiber Preparation Tool Demand● 4 easy-change chucks for:bare fiber, patch cords & ribbon fiber● Identifies 3 common test tones● Identifies dominant traffic direction, audible alarm● Approximate core power reading● Low false detection & insertion loss● Very easy to operate● Battery low indication

Product

Fiber Optic Converter

RS-232

-

VI Control Systems Ltd.

RS-232 - VI Control Systems Ltd.

A simple and inexpensive RS-232 to fiber optic converter. 

Product

RFoG Fiber Optic 1550nm Transmitter

T8500AC Series

-

Maxcom Inc.

T8500AC Series - Maxcom Inc.

The MX-T8500AC series externally modulated transmitter delivers high performance signal transmission of NTSC, PAL, digital or compressed digital signals from 50-862 MHz for CATV applications.

Product

Optical Channel Monitor

-

Optoplex Corporation

Optoplex Corporation

Optoplex Optical channel monitor (OCM) uses proprietary thin-film interference filter technology combined with a micro-actuator and high-speed electronics. Optical channel monitor is used to measure critical information data on optical transmission signals in DWDM networks for monitoring signal dynamics, determining system functionality, identifying performance change, and providing feedback for controling network elements so as to optimize operational performance. In particular, Optoplex Optical channel monitor can automatically scan the C-, L- or C+L-band wavelength range and precisely measure channel wavelength, power, and optical signal-to-noise ratio (OSNR). See the following schematic diagram for OCM working principle.

Product

1550nm Direct Modulated AGC Optical Transmitter

HT1500A

-

Hangzhou Huatai Optic Tech. Co., Ltd.

HT1500A - Hangzhou Huatai Optic Tech. Co., Ltd.

External modulation technology, with the laser working in direct current, has the advantages of no laser chirp, low dispersion distortion, large extinction ratio, and high speed. It also has the disadvantages of high cost and high difficulty in manufacturing.

Product

FTTH Optical Node

SRXG-100WD

-

Hangzhou Softel Optic Co., Ltd.

SRXG-100WD - Hangzhou Softel Optic Co., Ltd.

SRXG-100WD CATV converter is for digital television, fiber to the home. This machine adopts the high sensitivity optical receiving tube, without power supply, no power consumption. When the input optical power output level Pin=-1dBm, Vo=68dBuV, economic, flexible application integration, application of fiber to the home network.