Product

Manual Vision Measuring Machine with Probe

SVM II P

-

Attotech Co., Ltd.

SVM II P - Attotech Co., Ltd.

Product development, 2D scanning, quality inspection, such as watch, electronic connector, hardware, stamping, quality inspection, such as watch, electronic connector, hardware, stamping, spring and circuit board, etc.

Product

Line Automation Equipment

5000 Series In-line Handler

-

Circuit Check, Inc.

5000 Series In-line Handler - Circuit Check, Inc.

The Circuit Check 5000 Series In-line Handler is an integrated inline solution that combines automation, fixturing and measurement hardware in addition to other in-line PCBA probe based test stations, while adding a standardized quick change fixture interface. The 5000 series in-line is a unified solution that is software and hardware agnostic, enabling adaptability to a variety of off-the-shelf lower cost ICT, flash and functional test software and hardware.

Product

High Performance Liquid Chromatograph Triple Quadrupole Mass Spectrometer

LCMS-8045

-

Shimadzu Corp.

LCMS-8045 - Shimadzu Corp.

Equipped with a heated ESI probe, the LCMS-8045 has the highest sensitivity in its class. The heated ESI probe, high-temperature heating block, desolvation line (DL) and drying gas, all act to promote desolvation and prevent contamination due to the penetration of liquid droplets into the MS unit. This improves the robustness, so reliable and high-accuracy data can be obtained over the long term. The LCMS-8045 also achieves the world's fastest scan speed (30,000 u/sec) and polarity switching speed (5 msec). These enable ultra-high-speed, high-sensitivity analysis. The excellent cost performance of this system is demonstrated in food safety, environmental analysis, and other quantitative analyses, it can be upgraded to the LCMS-8060.

Product

Microprobe Thermometer

BAT-12

-

Physitemp Instruments

BAT-12 - Physitemp Instruments

The BAT-12 laboratory digital thermometer is Physitemp's most popular and best selling instrument due to its versatility, quality construction and low cost.The BAT-12 has 0.1°C resolution and super accuracy of 0.1°C ±1 digit between 0-50°C, 0.1°C ± 1 digit over full range.The temperature range is -100 to 200°C. The BAT-12 provides fast readings, usually within 2-5 seconds depending on the temperature probe in use.

Product

Cleaner for Test Probe

EQOmat

-

WIT Co., Ltd

EQOmat - WIT Co., Ltd

We have developed EQOmat, a cleaner exclusively for test probes that removes dust such as flux and solder debris adhering to the tip of the test probe. The structure and thinness built with the user's convenience in mind are important items that have sufficient functionality and are indispensable for long-term use of the probe. * EQOmat is an abbreviation for Ecological Qualified Octopus Mat.

Product

Advanced KIT: LED LUX Measurement Kits

LLM-Basic KIT and LLM

-

Senseca

LLM-Basic KIT and LLM - Senseca

Special photoradiometer kits with PHOT probe for the measurement of ILLUMINANCE. Thanks to the high precision sensor, the kits can be used in a wide range of applications and situations where the measurement of illuminance (LUX) is necessary.

Product

Wide Range Flexible Current Probe

EFX6000

-

Summit Technology, Inc.

EFX6000 - Summit Technology, Inc.

The EFX6000 is a flexible AC current clamp utilizing the Rogowski principle. It can be used to measure currents from 1 amp to 6000 Amps in 2 auto-ranges, over a wide frequency range to 10kHz. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas, around large conductors and where access to confined or tight spaces is a problem. It requires no batteries or external power supply.

Product

Bench-Top Macroscopic Raman Spectrometer

Modular Raman Microscope

-

HORIBA, Ltd.

Modular Raman Microscope - HORIBA, Ltd.

HORIBA’s modular Raman spectrometers allow the user to have a flexible Raman system to handle high performance spectroscopy at a price to fit most budgets. The modular microscope can also be used with a range of sampling options, including remote probes. A Raman spectrum recorded with a fiber-coupled Raman microscope of acetaminophen is shown below.

Product

Standard 0.62 (18.00) - 4.00 (114.00) High Performance Lead Free Probe

LFRE-1V-4

-

ECT

LFRE-1V-4 - ECT

Current Rating (Amps): 6Average Probe Resistance (mOhm): 10Test Center (mil): 75Test Center (mm): 1.91Full Travel (mil): 250Full Travel (mm): 6.35Recommended Travel (mil): 167Recommended Travel (mm): 4.24Mechanical Life (no of cycles): 500,000Mechanical Life Remark: *Ultra High force products may observe slight decrease in cycle life.Overall Length (mil): 1,300Overall Length (mm): 33.02

Product

Field Probes for Handheld Analyzer

-

Schwarzbeck Mess Elektronik

Schwarzbeck Mess Elektronik

The FSHPH is a passive, single-axis H-field probe suited for non-ionizing radiation measurements. The FSHPE allows a fast and accurate safety-evaluation of the measurement environment.

Product

High Voltage Probe

HVP-10R

-

PINTEK Electronics

HVP-10R - PINTEK Electronics

* 10KVDC+ACpeak* 100MΩ Impedance* DC~120MHz* 100:1, Read Out

Product

Transversal-Hall-Probe

-

MAGMESS Magnet-Messtechnik

MAGMESS Magnet-Messtechnik

For the Gaussmeters are several transverse Probes with different dimensionsand sensitivity available.

Product

Insulation Resistance Tester for PV (2 range)

MIS-PV1

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

MIS-PV1 - MULTI MEASURING INSTRUMENTS Co., Ltd.

The model MIS-PV1 is an insulation resistance tester for the exclusive use in photovoltaic systems. The ordinary insulation resistance testers cannot make measurement properly during generation of PV systems. This instrument, however, can measure the insulation resistance simply by touching probe to the live line whether making generation or not. There are two ranges of PVH and PVL. PVH is for high voltage generation system (more than 500V and less than 1000V) and PVL is for the system less than 500V.

Product

Thermometer, -20°C to +400°C, 7.9 ", 2.7 ", 1.2 "

72-6700

-

Tenma

72-6700 - Tenma

Infrared Thermometer*Three thermometers in one...Infrared, Pt100 ohm and Thermocouple*Accommodates 4 wire Pt-100 ohm probes and thermocouple types K, J, R, T, and E.*Selectable readings °C or °F*Data Hold function*Min./Max memory function*Laser guide for IR function*RS 232 output*Auto power off

Product

Linear Testfixture (Cassette Not Included), UTT 586 x 248 mm

MG-03

-

MG Products

MG-03 - MG Products

FEATURES• Linear click system with ball bearings, using gas springs• 10 mm ESD-proof top cover with aluminium reinforcement bars• Steel base cabinet with detachable aluminium back and bottom panels• Detachable interchangeable case system with an 8 mm spring loaded probe protection cover• Base cabinet fitted with a telescopic guide rail and catchTECHNICAL SPECIFICATIONS• Max. number of probes (2000N) 1300 units• Max. PCB height: 60 mm• Linear travel: 12 mm• Max UUT: 586 x 248 mm (wxd• Outer dimensions: 750 x 490 x 100 x 170 mm (wxdxh1xh2)• Designed for changeable cassette

Product

TEM Cells

-

EMCTEST

EMCTEST

Transverse Electro Magnetic (TEM) cell or Crawford cell (named after its inventor) is used to generate accurate electromagnetic waves over a wide frequency range: DC (0 Hz) to GHz., EM waves generated in the cell propagate in transverse mode and have the same characteristics as a plane wave. It can be used to calibrate E-field broadband probes for testing radiated E-field immunity as well as for measuring radiated emission from a product with a spectrum analyzer/EMI receiver.TEM cell generates a consistent electromagnetic field for testing small RF devices such as wireless pagers, receivers, portable phones, etc.

Product

Manual Fixture Kit

230356 – CMK-07

-

Columbia Elektronik AB

230356 – CMK-07 - Columbia Elektronik AB

Linear click system with ball bearings, using gas springs.10 mm ESD-proof top cover with aluminum reinforcement bars.Steel base cabinet with detachable aluminum back and bottom panels.Detachable interchangeable case system with an 8 mm spring-loaded probe protection cover.Base cabinet fitted with a telescopic guide rail and catch.

Product

Photolysis Rate Analyzer

PFS-100

-

Focused Photonics Inc.

PFS-100 - Focused Photonics Inc.

, HONO, HCHO etc.) are key indicators for identify status & extent of photochemical pollution.The analyzer is receiving solar radiation by quartz probe and transferring the radiation to spectrum via optical quartz fiber, the spectrum data will be evaluated and compared with reference data with mathematical approach and gives photolytic rate.

Product

Semi-Automated Probe Stations

SPS 2600, SPS 2800, and SPS 12000 Series

-

MicroXact, Inc.

SPS 2600, SPS 2800, and SPS 12000 Series - MicroXact, Inc.

The SPS 2600, SPS 2800, and SPS 12000 Series systems are MicroXact’s semi-automated probe stations designed to be flexible and easy to use when performing high productivity device characterization, wafer level reliability testing and failure analysis. These semi-automatic probe station systems are designed to support manual and semi-automatic probing of up to 200mm wafers.

Product

InfiniiMax Single-ended Connectivity Kit

E2668B

-

Keysight Technologies

E2668B - Keysight Technologies

Use for single-ended measurements; includes one single-ended browser, one solder-in probe head, and one socketed probe head.

Product

Industrial Inspection Cameras

-

General Tools & Instruments

General Tools & Instruments

Industrial Inspection Cameras are our top-of-the-line inspection cameras. They feature glass lenses, superior optics, crystal-clear displays, and compatibility with the thinnest probes on the market. All Industrial Inspection Cameras were recently upgraded to capture VGA (640 x 480 pixel) resolution video clips and remove glare and reflections from them. All cameras in this sub-category are made in Taiwan, making them compliant with the Trade Agreements Act (TAA) of 1979a necessity for many buyers with the U.S. military and federal agencies.

Product

Exchangeable Test Fixture

MA 2112/D/H/S-7

-

INGUN Prüfmittelbau GmbH

MA 2112/D/H/S-7 - INGUN Prüfmittelbau GmbH

Parallel contact stroke: 15 mmContact force max.: 2000 NInterface block required: Test system sideInterface signals max.: 1190Component on PCB: 58 mmPressure frame unit-opening angle: 75Installation height test probe top: 16,0 mmInstallation height test probe bottom: 10,5 mmInstallation height dual-stage test probe bottom: 16,0 mmweight: 11,30 kg

Product

Probes and Sensors for Measurement of Relative Humidity

-

Process Sensing Technologies

Process Sensing Technologies

Relative humidity is measured in a variety of applications. Rotronic offers a range of probes and sensors in its portfolio to cover all industries and needs.