Product

Lamp & Fixture Wiring Tester

GT3110GAM LAMPCHEK

-

GAM Products, Inc.

GT3110GAM LAMPCHEK - GAM Products, Inc.

LampChek indicates the lamp and fixture continuity.

Product

Semiconductor Curve Tracer

CS-8000 Series

-

IWATSU Electronic Co., Ltd.

CS-8000 Series - IWATSU Electronic Co., Ltd.

The CS-8000 series are equipped with a high-voltage source of up to 5 kV and a high-current source of 2 kA. It features Pulse output, Gate pattern, and very small current measurement capabilities, and it supports the design evaluation of wideband-gap semiconductors such as SiC and GaN.

Product

Semiconductor Curve Tracer

CS-10000 Series

-

IWATSU Electronic Co., Ltd.

CS-10000 Series - IWATSU Electronic Co., Ltd.

This optional unit minimizes parameter variation on devices causedby heat. Pulse rise time can be configured for 1, 3, or 5ms; pulse duration from 1ms to 20ms; and pulse interval from 100ms to 2 seconds. This option is installed at the factory. Any changes desired after purchase will require return the unit back to IWATSUfactory.

Product

IEC60695-11-2 Single Wire And Cable Vertical Burning Tester

CX-D12

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-D12 - Shenzhen Chuangxin Instruments Co., Ltd.

It’s strictly designed according to IEC60695-11-2, IEC60332-1, GB/T18380.11-2008, GB/T18380.12-2008 etc. Stainless steel screen with a sliding burner handle support for approaching or movingback the flame from the sample under test according to the CEI standards for test on cables.

Product

MTA Wiring Analyzer

2650

-

DIT-MCO International

2650 - DIT-MCO International

DIT-MCO's newest test solution, the Model 2650, incorporates modularity so that the system conforms to your testing needs. The modular switching units can rack-and-stack in a cabinet providing concentrated test points or can be distributed around the Unit Under Test (UUT) eliminating long, cumbersome adapter cables. Or you may reconfigure the system at any time when your needs or the UUT changes.

Product

Strip-Line™ Socket with Bifurcated Contact Wire Wrap Pins

Series 0501

-

Aries

Series 0501 - Aries

Strip-line Sockets with Bifurcated Contact Wire Wrap Pins. Features: For mounting liquid crystal displays and other high pin count or odd centered components. Available in several sizes with bifurcated contacts in wire wrap or solder tail pins. Consult Data Sheet No. 12008 for solder tail pins.

Product

3'Harness, 50-Pin Male D-sub Connector on one end, loose wired (numbered) other end

GT97107

-

Marvin Test Solutions, Inc.

GT97107 - Marvin Test Solutions, Inc.

3' harness, 50-pin male D-sub connector on one end, loose wired (numbered) other end.

Product

Cable Tester & Cable Tracer & Multi-Functions Lan Tester

M-CT-430A

-

Fuzhou Metricu Technology Co Ltd

M-CT-430A - Fuzhou Metricu Technology Co Ltd

The multifunction LAN tester M-CT-430A is designed for maintenance and installation of cable, cable tracer, and HD Coaxial video level meter test in one equipment. The unit supports detect the near-end, mid-end and far-end fault point of RJ45 cable connector, and also supports Port Flash, PING test, IP address Scan, Link Monitor. Installers take the all in one cable tester, making working conditions safer and increasing productivity.

Product

Measuring Microscopes, Image Processing + Drawing Die And Wire Measurement

Easy Low Cost Wire Drawing Die Measuring Microscope

-

Optik Elektronik Gerätetechnik GmbH

Easy Low Cost Wire Drawing Die Measuring Microscope - Optik Elektronik Gerätetechnik GmbH

Simple optical measuring system for diameter and ovality of wire drawing dies with image processing software.

Product

4-20 mA Loop Powered Two Wire Oxygen Transmitter

OxyTrans

-

Edgetech Instruments

OxyTrans - Edgetech Instruments

The Edgetech Instruments Model OxyTrans is an easy to use, accurate and economical way to measure Oxygen at trace and % levels. A simple display and one point calibration allows for a quick start of the instrument.

Product

Heavy Duty Circuit Tester with 12' Retractable Wire & Battery Clip

27300

-

S & G Tool Aid Corp

27300 - S & G Tool Aid Corp

Features an extra long wire that stretches up to 12 feet for use, then automatically retracts. Quickly and easily check electrical circuits and accessories on 6 and 12 volt systems. Great for use on cars, trucks, boats, trailers, motorcycles, airplanes and snowmobiles. Heavy duty ground clip with insulator. 3 1/4" standard length probe

Product

Lo-PRO®file Collet Socket with Wire Wrap Pins

Series 503

-

Aries

Series 503 - Aries

LO-PRO file Collet Sockets with Wire Wrap Pins. Features: LO-PRO file Collet Sockets are available with solder tail or wire wrap pins. Consult Data Sheet No. 12011 for solder tail pins. Choose from several sizes and plating options.

Product

High Voltage, Continuity & Hipot, Cable & Wire Harness Test Systems

CableEye HVX, HVX-21

-

CAMI Research Inc.

CableEye HVX, HVX-21 - CAMI Research Inc.

Fast ● Simple ● Precise

Advanced wiring analyzer scans for continuity (opens, shorts), miswires, resistance, capacitance, components (resistors, diodes, LEDs, capacitors) dielectric breakdown, insulation resistance, intermittent connections
HVX (Item 829) 1500 Vdc, 1000 Vac
HVX-21 (Item 829A) 2100 Vdc, 1200 Vac

For diagnostic and Pass/Fail Testing — Permits expanded testing (compared to models in our low voltage product line) for insulation resistance (IRI) and dielectric breakdown (DWV).

All CableEye testers are suitable for production, fault diagnosis, QC (Quality Control), assembly, and prototyping of standard or custom cables. Each combines test, fault location, design, documentation, labeling, and database storage in one instrument. Tests can be performed on long cables (with or without connectors) or no cables (e.g. connectors, backplanes, PCBs, components).

Standard Features & Benefits:

• USB certified, PC-based tester for a versatile, fast, robust system with long life-cycle.
• Multilingual, dynamic, graphic-rich display (netlist & wiring schematic) provides clarity and speeds diagnostics.
• 128 Test Points, expandable to 1024 providing flexibility as your product line changes.
• User-selectable voltage to each connection group in the cable simplifies an otherwise complex process, accelerating testing.
• Programmable Ramp Up, Ramp Down, Dwell Time (same as Test Time), Trip Current, and Trip Delay (same as Soak Time) adds versatility.
• Current leakage detected during HV test phase provides a measure of insulation resistance up to 1 GΩ (HVX) and 5 GΩ (HVX-21) - any leakage current exceeding a preset limit reveals the presence of moisture, flux, or other contamination on exposed contacts.
• Real-time screening for intermittent connections for pinpointing elusive faults and improving quality.
• Automation scripting in a simple, intuitive language allowing non-programmers to reduce operator error by automating repetitive steps.
• Pop-Up Work Instructions. choose the exact amount of detail, imagery, language and automation you need to ensure your work instructions and tests are carried out flawlessly.
• Flexible tolerancing: optionally define as percentages or absolute terms, as well as asymmetrically (e.g. +0%/-10%) for improved yields.
• Barcode-tracking & archival data-logging to achieve error-proof test process and improved traceability & productivity.
• Print PASS/FAIL labels, test reports (with or without color wiring schematics/netlists) and log reports to satisfy ISO9000 reporting requirements.
• Compatible with laptop and touchscreen PCs for fieldwork and rack/off-bench mounting.

Includes:
CB29 board set (Item 759) for bare wire connections; comprehensive PC software with Database of >200 standard cables; 2 yr Product Support Subscription comprising Warranty, free tech support, and free software upgrades.

Select Add-On Options:
Hardware: 128-point Expansion Modules (attach to base); 4-Wire Kelvin Resistance Measurement, 1 mΩ at 1 A; Advanced Measurements; External Measurement Instrument Port (e.g. 10 GΩ Isolation at 100 V); Remote Control Connector for Deadman Switch; Environmental Sensor
Software: PinMap™ fixture editor, Connector Designer™ connector editor, or Autobuild™ guided assembly modules

camiresearch.com |@CAMI_CableEye |+1.978.266.2655

Product

Benchtop Wiring Analyzer

2115

-

DIT-MCO International

2115 - DIT-MCO International

The Model 2115's compact size makes it the ideal choice for many benchtop or portable test applications. The small size does not mean you sacrifice any functionality. The 2115 delivers a full 1500 volt isolation and 2 amp continuity test stimulus. With the optional AC breakdown test providing 1000 VAC test stimulus, you will meet all test requirements.

Product

Automatic High Voltage Wire Harness Testers

-

MK Test Systems Ltd.

MK Test Systems Ltd.

Automatic high voltage wire harness testers are used in a variety of industries, such as aerospace and defence through to rail, and are used to test any equipment which contains a high number of electrical wires, or active components ensuring these pass specified test criteria at the sub-assembly and final stages of construction. These systems ensure the wiring and components are 100% compliant and undamaged, recording every test measurement and aiding diagnosis of detected faults.

Product

Wires and Pipe Locator

LKZ-720

-

Sonel S.A.

LKZ-720 - Sonel S.A.

*Detection of wires and cables (live or not)**detection of cables in ceilings, walls and floors,**detection of breaks in cables,**tracing cables in building installation,**locating power points and switches in buildings,**locating short circuits between leads,**tracing shielded cables,**tracing cables in metal ducts.*Identification of fuses on the distribution board.*Tracing underground cables.*Tracing conductive water and heating pipelines.*Non-contact detection of live cables.

Product

Banana-Triax Adapter For 2‑Wire (Non-Kelvin) Connection

N1297A

-

Keysight Technologies

N1297A - Keysight Technologies

The N1297 Series is a collection of banana-triax adapters for the Keysight B2900 Series precision source measure unit (SMU). It consists of both 2-wire as well as 4-wire connection requirements.

Product

Pin-Line™ Collet Socket with Wire Wrap Pins

Series 0503

-

Aries

Series 0503 - Aries

Pin-Line Collet Sockets with Wire Wrap Pins. Features: Rows of socket strips may be mounted on any centers and are end-to-end or side-by-side stackable for .100 [2.54] grid or matrix patterns. Available with wire wrap or solder tail pins. Consult Data Sheet No. 12013 for solder tail pins. Break feature allows strips to be cut to the number of positions desired.