Fieldbus
An all-digital, serial, two-way communications system that interconnects measurement and control instrumentation such as sensors, actuators and controllers.
See Also: Serial, I2C, LIN, Can bus, ExpressCard, FireWire, RS-232, RS-485, PCI Express, Serial ATA, Serial Peripheral Interface, SMBus, PROFIBUS
-
Product
IDoor Module: 2-Port Hilscher NetX100 FieldBus MPCIe, EtherNet/IP, RJ45
PCM-26R2EI
-
Meets Advantech Standard iDoor TechnologyPCI ExpressR Mini Card Specification Revision 1.2 compliantIdentical interface for all Hilscher Real-Time Ethernet Fieldbus ProtocolsVarious colorful front plates for protocol identificationEasy integration by wide range of device driversHigh extended temperature range up to 70°CCompatible with embedded automation PC UNO-1/2/3/4 series
-
Product
Carrier Board for Hilscher Fieldbus
SF1-STUDIO
-
SF1-STUDIO is optimized for Hilscher real-time Ethernet & fieldbus modules. Many popular protocols are supported. Ethernet, mezzanine modules are available for EtherCAT, EtherNet/IP, Open-Modbus/TCP, POWERLINK, PROFINET IO, Sercos, and VARAN.
-
Product
DDLS 200 with 2 Mbit/s Transmission Rate
-
Leuze electronic GmbH + Co. KG
Optical data transmission for RS interfaces and fieldbuses up to 300 m and up to 2 Mbit/s. Infrared data transmission protects the DDLS 200 from interference. Systems are available for all common industrial fieldbus interfaces. The ranges are stepped and reach a maximum transmission distance of 300 m. Low ambient light sensitivity through special FSK method. Available interfaces: PROFIBUS, Interbus and CAN/DeviceNet, as well as RS422 and RS 485.
-
Product
DAQ Modules
Q.series X DAQ Modules for Ethernet, CAN and ProfiNet
-
All Q.series X DAQ systems possess the same measurement capabilities and performance, regardless of form factor. The main differentiating quality between the XL and XE versions of Q.series X is the Fieldbus communication protocol (Localbus or EtherCAT), which can be interchanged on Q.series X modules using a simple firmware update.
-
Product
Process Analyzers
-
Knick Elektronische Messgeräte GmbH & Co. KG.
Industrial meters for pH, ORP, conductivity and oxygen. In 2- and 4-wire technology, explosion-proof.Bus Communication: HART, FOUNDATION Fieldbus, Profibus DP and PA. Robust industrial housing with high IP protection. Suitable for outdoor use. For analog and digital sensors. Simple intuitive operation. From DIN rail transmitters up to the modular system.
-
Product
IDoor Module: 1-Port Hilscher NetX100 FieldBus MPCIe, PROFIBUS, DB9
PCM-26D1DB
-
Meets Advantech Standard iDoor TechnologyPCI ExpressR Mini Card Specification Revision 1.2 compliantSupports Hilscher PROFIBUS Protocol LibraryEasy integration by wide range of device driversHigh extended temperature range up to 70°CCompatible with embedded automation PC UNO-1/2/3/4 series
-
Product
Fieldbus Systems
-
ADDI-DATA offers fieldbus systems for Ethernet and EtherCAT. The Ethernet Systems can be upgraded with an additional Wi-Fi interface for parameter settings and easy monitoring.
-
Product
Industrial Fieldbus
-
Industrial fieldbus iDoor series modules support: CANopen, PROFIBUS, PROFINET, EtherCAT, and EtherNet/IP in automation applications.
-
Product
Fieldbus Gateway
EKI-1242IEIMS
-
Modbus RTU/TCP to 3-in-1 EtherNet/IP or PROFINET or OPC UA Protocol Gateway, Wide Temperature. Seamless integrate Modbus RTU/TCP and EtherNet/IP or PROFINET or OPC UA communication. Built-in real time diagnostic to increase high efficiency of device management.
-
Product
Industrial Protocol Gateways
-
Advantech Fieldbus gateways provide seamless communication between Fieldbus and industrial Ethernet devices as well as support for different protocols.
-
Product
Small-Size Modular Embedded Box PC With Intel® Celeron® J6412
UNO-2372G V2
-
Intel® Celeron® J6412 quad-core processor with 8GB DDR4 memoryCompact, robust, fanless and scalable system with high stabilityOptional second stack for supporting extension iDoor module, including wireless connectivity, industrial fieldbus and more I/O portsSupports NVME storage with high data-transmission efficiencySupports Windows 11 IoT Enterprise LTSC
-
Product
IDoor Module: 2-Port Hilscher NetX100 FieldBus MPCIe, EtherCAT, RJ45
PCM-26R2EC
-
Meets Advantech Standard iDoor TechnologyPCI ExpressR Mini Card Specification Revision 1.2 compliantIdentical interface for all Hilscher Real-Time Ethernet Fieldbus ProtocolsVarious colorful front plates for protocol identificationEasy integration by wide range of device driversHigh extended temperature range up to 70°CCompatible with embedded automation PC UNO-1/2/3/4 series
-
Product
EtherCAT Gateways
-
EtherCAT Fieldbus gateways provide seamless communication between Modbus RTU/TCP and EtherCAT communication protocols.
-
Product
Analyzers
-
for analysis and optimizing of all RS232 and RS422/485 field-bus connections. It gathers exact information about every line change with 1µsec precision – indispensable for each analysis of time depending protocols like Modbus RTU, Profibus or similiar.
-
Product
Small-Size Modular Embedded Box PC With Intel® Processor N250 And Intel Atom® X7433RE Processor
UNO-2372V3
-
Intel® N250 (1.3GHz, formerly Twin Lake) and Intel Atom® x7433RE (1.5GHz, formerly Amston Lake) quad-core processorEquipped with one DDR5 memory slot (up to 16GB)Compact, robust, fanless and scalable system with high stabilityOptional second stack for supporting iDoor extension modules, including wireless connectivity, industrial fieldbus and additional I/O ports1 x M.2 B Key (3042/3052, PCIe x1, USB 3.2/2.0, SATA), 1 x M.2 E key (2230, PCIe x1, USB 2.0) for wireless modules1 x M.2 M key (2242 NVMe, PCIe x2) for storageSupports Windows 11 LTSC, Ubuntu 22.04
-
Product
Connection Units
-
Leuze electronic GmbH + Co. KG
All peripheral devices – such as sensors, safety switches and cameras – require a connection to the fieldbus or a control unit. Depending on device type and area of application, our modular connection units offer variable interfaces that enable simple connection of the devices directly to the fieldbus and thus ensure simple integration of new devices in the system.
-
Product
USB-8486, USB, 1-Port, Fieldbus Interface Device
781160-01
-
The USB‑8486 is a FOUNDATION fieldbus device for developing applications with the NI‑FBUS driver, NI‑FBUS Configurator, and NI‑FBUS Monitor. FOUNDATION fieldbus is a popular industrial communication standard for process control applications. The NI‑FBUS Configurator features user-friendly multi-window interfaces to provide tools for the complete configuration, programming, and execution schedules of FOUNDATION fieldbus segments. The NI‑FBUS Monitor is a stand-alone application used to monitor, debug, and analyze fieldbus data packets.
-
Product
All-in-One Software for UniStream - PLC, HMI, I/O, VFDs, and Servo
UniLogic Studio
-
Powerfully efficient, UniLogic’s ergonomic design enables you to rapidly develop all project aspects: Hardware and Communication configuration, Motion, Ladder, and HMI applications.Built-in, context-sensitive editors enable you to write Ladder or C functions, configure and implement servo Motion, create beautiful HMI screens and interactive web pages, instantly translate them from Italian to Chinese, easily track data and display it live via Trends and gauges or export it to Excel, raise multi-level Alarms and send notification via SMS or email and run Recipes. With UniLogic, you can conveniently configure and implement a broad range of industrial fieldbus and IT protocols—and easily integrate IIoT/Cloud technology into your solutions.
-
Product
IO-Link Master
-
- For connection of up to eight IO-Link devices- Reliable transmission of machine data, process parameters and diagnostic data to the controller- Simultaneous data exchange with the controller and the IT world- Mounting flexibility for field mount or control cabinets- With integrated fieldbus interface
-
Product
Modular Embedded Box PC With 11th Gen Intel® Core™ I CPU
UNO-2484G V2
-
Intel® Core™ 11th i7/i5/i3 Processor with 8GB DDR4 3200Mb/s memory4 x GbE, 3 x USB 3.2 Gen2, 1 x USB2.0, 1 x HDMI 1.4, 1 x DP 1.4a, 4 x RS232/422/485Optional 2nd stack supports up to 2 x iDoor extension for expending wireless connectivity, industrial fieldbus or more I/OCompact fanless designRuggedized by zero cable and lockable I/O designSupports NVME storage with high data-transmission efficiency
-
Product
Stationary Industrial Scanners
-
Stationary industrial scanning solutions are specifically designed for applications that are not permanently monitored by operators and are used in a wide variety of industries. Stationary position scanners offer various options for how output data can be used and interface with your business PCs, servers, or ERP, in virtually any fieldbus protocol, providing real value on how your organization uses this business intelligence data. With Datalogic’s versatile portfolio of stationary industrial scanners, customers can get a solution for a full array of barcode reading needs.
-
Product
Pocket-Size Edge IoT Gateway With Intel® Atom™ E3815/E3825
UNO-2271G
-
Intel® Atom™ E3815/E3825 processor with 4GB DDR3L onboard memory2 x GbE, 1 x USB 3.0, 1 x HDMI, Option 2 x RS-232/422/485 or 3 x USB2.0Compact Fanless Design and Rubber Stopper Design with internal reserved screws for 2nd layer assemblyDiverse system I/O and Isolated Digital I/O by iDoor TechnologySupports Fieldbus Protocol by iDoor Technology3G/GPS/GPRS/Wi-Fi communication by iDoor technologySupports 30+ iDoor combination with four main categories of smart factory applications32GB eMMC storage onboardRED Compliance for LTE solution
-
Product
Digital Fiber Sensor
FX-550L
-
Panasonic Industrial Devices Sales Company of America
Panasonic IO-Link technology makes it possible to continuously collect and process data and to control the sensor. This allows users to implement predictive maintenance and to monitor operation in machines and assembly lines. Processing the multitude of data requires users to invest in know-how and time. Panasonic has developed a self-diagnosis function for each sensor type. This function sends sensor data via IO-Link to a higher-level fieldbus, thus informing about the state of the sensor directly. This way, the amount of production data and the work needed to analyze the data is reduced.
-
Product
Process Industry Head Thermometers
-
Rough environmental conditions, hazardous areas, space-saving installation and flexible assembly are only some examples of the skills of our daily proven and reliable temperature sensors. With direct sensor output or 4 to 20 mA HART, PROFIBUS, FOUNDATION Fieldbus or WirelessHART communication, including device configuration with LCD display. Available without thermowell or with welded or drilled thermowell for sensor protection. Available also for non-invasive temperature measurements with high precision.
-
Product
Palm-Size Industrial Automation PC With Intel® Celeron® J1900
UNO-2272G
-
Intel® Atom™ N2800/J1900 Processors with 2GB DDR3/DDR3L Memory1 x GbE, 3 x USB 2.0/3.0, 1 x COM, 1 x HDMI, AudioCompact with Fanless DesignRubber Stopper Design with Captive ScrewDiverse system I/O and Isolated Digital I/O by iDoor TechnologySupports Fieldbus Protocol by iDoor TechnologySupports MRAM by iDoor Technology
-
Product
DAQ Modules
Q.series X DAQ Modules for EtherCAT
-
All Q.series X DAQ systems possess the same measurement capabilities and performance. The main differentiating factor between the XL and XE versions of Q.series X is the Fieldbus communication protocol, which can be interchanged on Q.series X modules using a simple firmware update.
-
Product
Small-Size DIN-Rail IPC With Intel® Celeron® J1900
UNO-1372G-J
-
Intel® Celeron® J1900 2.0GHz processor with 4GB DDR3L MemoryRobust design for industrial control and harsh environmentIsolated protection of COM and digital Input/outputCompact fanless designWide power input range and operating temperatureChassis grounding protectionFlexibility of expanding functionality for various applicationSupport diverse industrial fieldbus, IO & peripheral iDoor modulesDedicated TPM2.0 microcontroller designed for hardware security
-
Product
Networking
-
esd is a supplier of networking products for Ethernet-based fieldbus systems. These include network switches and industrial Gigabit Ethernet switches with integrated COM server. All modules are suitable for DIN rail mounting.
-
Product
Small Size DIN-Rail IPC With Intel® Atom™ E3845
UNO-1372G
-
Intel® Atom E3845 1.91GHz processor with 4GB DDR3L Memory3 x GbE, 3 x USB, 2 x COM, 1 x VGA, 1 x HDMI, Audio, iDoor, mSATA, 2 x mPCIe, 1 x SATA, 4 x DI, 4 x DO, 1 x Power TerminalCompact with Fanless DesignDual Power Input for avoiding Power Down TimeExchangeable RTC Battery with easy Access on the TopDigital I/O with Isolation Protection for Sensing and controllingDiverse system IO and Supports Fieldbus Protocol by iDoor Technology as a Protocol GatewaySupports MRAM by iDoor TechnologyLAN Redundancy (Teaming)
-
Product
Fieldbus Network
CC-Link
-
CC-Link is a Fieldbus network that processes both cyclic I/O data and acyclic parameter data at high speed. CC-Link was developed by Mitsubishi and today, it is managed by the CC-Link Partner Association (CLPA). CC-Link is a very popular network in Asia. Worldwide, it is used for time-critical applications based on Mitsubishi Automation technology. CC-Link products are certified by the CLPA, guaranteeing worldwide compatibility.
