Product

Wire Damaged Tester

WDT-1

-

Lisun Electronics Inc.

WDT-1 - Lisun Electronics Inc.

This equipment is designed and manufactured according to corresponding regulation in standard IEC884-1, GB299.1-96, GB16915.1-97 and other electronic accessories relevant standard. Mainly used to test damage degree of fixed connection components lead wire of with thread clamping type and no screw terminals, so as to inspect whether it can withstand mechanical stress during normal use.Specification: • Power supply: AC220V 50Hz • Test rate: 10±2r/min (GB16915.1-97: 12 ±1r/min) • Rotating radius: 100mm • Test distance: 250~500mm adjustable • Test numbers (Number of rotating): 0~999999 any set • Mass: 0.3KG, 0.4KG, 0.7KG, 0.9KG, 1.4KG, and 2.0KG (GB16915.1-97: 30N, 40N, 50N, 60N each of 2 pcs) • Stations: 2 • Dimension: 1200×1400×400 (mm) • Remarks: The mass and rotating radius can be optional as per customer requirements.

Product

Mating Coax Connector and 20 Coax Pins Crimped (both ends) to 3' Wires

GX96405

-

Marvin Test Solutions, Inc.

GX96405 - Marvin Test Solutions, Inc.

Mating coax connector and 20 coax pins crimped (both ends) to 3 ft wires

Product

Wire Mount Testers

-

Holding Informtest

Holding Informtest

Is designed to measure and control the DC resistance, electrical capacity, insulation resistance of electrical circuits and check the electrical insulation strength of electrical circuits.

Product

Gauge Type T Thermocouple Wire

W-TW-44P

-

Physitemp Instruments

W-TW-44P - Physitemp Instruments

Most thermocouple wire used in the manufacture of sensors is "Special Limits" wire which, to meet NIST standards, must be accurate to 0.5°C in the range 0-50°C. This means that even with most sophisticated electronics, the best possible accuracy for the system is 0.5°C.

Product

Gauge Type T Thermocouple Wire

W-TW-44

-

Physitemp Instruments

W-TW-44 - Physitemp Instruments

Most thermocouple wire used in the manufacture of sensors is "Special Limits" wire which, to meet NIST standards, must be accurate to 0.5°C in the range 0-50°C. This means that even with most sophisticated electronics, the best possible accuracy for the system is 0.5°C.

Product

5 KN Grips For Fine Wire

-

Shimadzu Corp.

Shimadzu Corp.

These grips offer a suitable method for tensile testing soft metal wires, ropes, and strings, all with a diameter of 3 mm (0.12 in) or less. The upper and lower grips include an articulated joint to maintain alignment of the specimen with the testing axis during testing.

Product

DB25 DIN-Rail Wiring Board

ADAM-3925

-

Advantech Co. Ltd.

ADAM-3925 - Advantech Co. Ltd.

Low cost universal DIN-rail mounting screw terminal module for PC-LabCard products with DB25 connectorScrew-clamp terminal blocks allow easy and reliable connectionsCase dimensions (W x L x H): 77.5 x 56.3 x 51 mm (3.1" x 2.2" x 2.0")To Be Used With PCI-1757UP, PCL-833

Product

Underground Wire Locators

-

Shenzhen Noyafa Electronic CO.,LTD

Shenzhen Noyafa Electronic CO.,LTD

Regardless of your needs, having a reliable wire locating device is critical to a successful project. Noyafa has been developing and manufacturing wire and cable locators since 2006.Our locators help in accurately locating the path of the underground wires, moreover measure the accurate depth of the invisible underground wires, and most importantly the price is affordable!

Product

Gauge Type T Thermocouple Wire

W-TW-44P2

-

Physitemp Instruments

W-TW-44P2 - Physitemp Instruments

Most thermocouple wire used in the manufacture of sensors is "Special Limits" wire which, to meet NIST standards, must be accurate to 0.5°C in the range 0-50°C. This means that even with most sophisticated electronics, the best possible accuracy for the system is 0.5°C.

Product

L60+ Thermocouple & Fine Wire Welder

-

Labfacility Ltd.

Labfacility Ltd.

The Thermocouple Welder, manufactured by Labfacility, is a compact, simple-to-use instrument designed for thermocouple and fine wire welding.

Product

DB9 To 10-Pin Wiring Board

OPT1-DB9E

-

Advantech Co. Ltd.

OPT1-DB9E - Advantech Co. Ltd.

DB9 to 10-pin wiring boardDimension: 35 x 42 x 20mm

Product

Gauge Type T Thermocouple Wire

W-TW-40P

-

Physitemp Instruments

W-TW-40P - Physitemp Instruments

Most thermocouple wire used in the manufacture of sensors is "Special Limits" wire which, to meet NIST standards, must be accurate to 0.5°C in the range 0-50°C. This means that even with most sophisticated electronics, the best possible accuracy for the system is 0.5°C.

Product

20-Pin DIN-Rail Flat Cable Wiring Board

ADAM-3920

-

Advantech Co. Ltd.

ADAM-3920 - Advantech Co. Ltd.

Low cost universal DIN-rail mounting screw terminal module for PC-LabCard products with 20-pin connectorCase dimensions (W x L x H): 77.5 x 67.5 x 51 mm (3.1" x 2.7" x 2.0")To Be Used With PCI-1735U, PCL-711B, PCL-720+, PCL-726, PCL-727, PCL-730, PCL-812PG, PCL-816, PCL-818 Series, PCL-836

Product

Mating Coax Connector With 20 Coax Pins Crimped (One End) To 5 Foot Wires

GX96404-60

-

Marvin Test Solutions, Inc.

GX96404-60 - Marvin Test Solutions, Inc.

Mating Coax Connector with 20 Coax Pins crimped (one end) to 5' wires. Coaxial cable: RG316, 50 ohms.

Product

Thermocouple Wires & Connectors

-

MRC ltd.

MRC ltd.

Is designed for sensor manufacturers for the production of commercial grade thermocouple junctions, and for users of large numbers of exposed junctionthermocouples such as test & development laboratories where multipoint temperature sensing of test pieces is required.

Product

Wired Solutions

-

Virginia Panel Corporation

Virginia Panel Corporation

For more than 65 years, VPC has honed its expertise in wiring services, ensuring exceptional quality in manufacturing quality-tested cable assemblies, patchcords, enclosures, and more to complete your interconnect solution.

Product

Voltage Tester With Wire Stripper

7122A

-

Peaceful Thriving Enterprise Co Ltd

7122A - Peaceful Thriving Enterprise Co Ltd

The product can measure AC voltage 10V to 1000V and DC voltage 7V to 1000V with polarity indication. All testing results will be displayed by LCD. This product can also measure continuity and RCD. Eventually, for the convenience of wire stripping and cutting, this product has combined the function of wire stripper.

Product

Wire Harness Tester

Panther4HT Master- Slave DSU

-

Qmax Test Technologies Pvt. Ltd.

Panther4HT Master- Slave DSU - Qmax Test Technologies Pvt. Ltd.

The Master- Slave DSU based Panther4HT Wire Harness tester is designed for testing and verifying electrical connections in a cable, harness, backplane or any other wired assembly. It offers unique Qmax MASTER - Slave concept and SATELLITE UNIT Options to avoid looping back of cable to the ATE. All Satellite Units communicates the measurements through LAN interface which is very useful for on-board applications in Aircrafts / Ships and similar applications where large cable looms are used. This innovative concept will eliminate the long adapter cables and hence storing, maintaining and re work of these kind of cables are avoided. Furthermore single Master Controller Unit (MCU) is used to control not only all the satellite units , but also communicate with all satellite units through Ethernet Communication port. A single reference Cable is used to link the all the satellite units with the Master Controller in controlled loop manner is a value add to the product.

Product

Drawing Die And Wire Measurement

DGMS – Die Geometry Measuring System

-

Optik Elektronik Gerätetechnik GmbH

DGMS – Die Geometry Measuring System - Optik Elektronik Gerätetechnik GmbH

Measuring system for diameter, roundness, reduction angle and bearing length of wire drawing dies.