-
Product
Universal / Tensile Testing Machine Consumables
-
Universal / Tensile Testing Machine Consumables
-
Product
CDNE For Emission Measurement On Luminaries
-
CDNs have been used as coupling-/decoupling networks to measureconducted noise as well as for immunity testing so far.
-
Product
Modulated Average Power Measurement
-
The Spanawave/Giga-tronics 80400A Series Modulated Power Sensors let you measure the average power of amplitude modulated, burst modulated and other complex modulated signals, such as TDMA signals - at bandwidths up to 40 kHz. This sensor works with the 8540B, 8540C, 8650A, 8650B series power meters.
-
Product
High-Precision Fuel Flow Measurement System
-
It enables to keep the temperature fluctuation of the circulation flow path in the system within ±0.2 °C (for 1 minute), which achieves stable fuel flow rate measurement.
-
Product
Spectroscopic Ellisopmeter for Simple Thin Film Measurement
Auto SE
-
The Auto SE is a new thin film measurement tool that allows full automatic analysis of thin film samples with simple push button operation.Sample analysis takes only a few seconds and provides a complete report that fully describes the thin film stack – including film thicknesses, optical constants, surface roughness, and film inhomogeneities.
-
Product
Bond Force Measurement And Calibration Systems
BFS-20
-
Based on its design and easy handling it can be used also on other brands to measure the bond force.
-
Product
Opacimeter on CONNECT Trolley for Measurement of Diesel Vehicles
MO CT | VP 135045
-
Maschinenbau Haldenwang GmbH & Co. KG.
The MAHA Opacimeter on CONNECT trolley is used for the measurement of diesel vehicles. The smoke opacity is tested and diagnosed in a time-saving and trouble-free manner in a partial flow procedure during free acceleration or under load of the engine. Rapid readiness for measurement and precise measurement results are the distinguishing features of the MAHA Opacimeter. Type-tested according to PTB requirements 18.09.
-
Product
Potential Measuring Coils
-
measure the magnetic potential of magnets, magnet systems and their surroundings.
-
Product
Intelligent Tensile Testing Machine
XLW-H
-
XLW-H Intelligent Tensile Testing Machine specializes in testing the mechanical properties of various flexible packaging materials. It is mainly used to test the heat seal strength, tensile strength, peel force, elongation of pharmaceutical packaging materials, aluminum foil, PVC hard sheet, composite film, syringe and other products.
-
Product
On-site EL/PL Inspection Machine
“EPTiF”
-
"EPTiF (EL/PL Test in Field)" enables you to check invisible conditions of installed solar panels during daytime by EL and PL inspections, which are adopted by a number of solar panel manufacturers, without detaching solar panels. Irradiance-independent and steady results can be obtained. This is the first in the industry.
-
Product
Automated Gage Measurement System
AGMS
System
Our Automated Gage Measurement System for Sand Screen (AGMS) provides accurate and repeatable optical measurements for all wire-wrapped gaps along the full screenlength. This inspection machine enables oil field sand screen manufacturers to meet the measurement requirements of API Spec 19S1 and ISO 17824:2009.
-
Product
Vertex Measuring Center
-
The Vertex Measuring Center is a high precision solution for smaller parts. Designed with the future in mind, the Vertex has a compact design, machine-side electronics, and an external computer. These features provide for high reliability, simple USB setup, and easy upgrades.
-
Product
Vibration Measuring System
-
Short Delivery Time・Low CostMeasurement Functions : Displacement / Velocity / Acceleration , Measurement (Amplitude) Range can be changeover.Basic Functions●Measurement Range: 2 Ranges●Alarm Setting (Alarm / Trip)●DC 4 ～20mA Level Output●AC 3Vp-p, DC 2V Monitor Output
-
Product
*High Power Measurement From Short Exposure
-
Ophir has a number of ways to measure high laser powers up to 12kW without heavy water cooled equipment. Most of today’s lasers can be set to emit for a short, precisely controlled period of time. If a short exposure to the laser of 0.3 – 10s is sufficient to measure the power then there are compact, uncooled sensors available for this purpose.
-
Product
Post-Mould Inspection Machine
IV-P1000
-
The IV-P1000 is a post-mould inspection machine best known for being a fully automatic vision inspection station and for having a user-friendly GUI for operator and recipe setup. This machine is best used to inspect packages for surface defects on top and bottom.
-
Product
Power Measurements Conditioner
-
The Power Measurements Conditioner provides voltage and current signal conditioning for a supported data acquisition module or device to make up to four simultaneous power measurements per conditioner. It also includes attenuation for voltage channels up to 2,000 V and has power, communication, and signal lines for current measurements from current transducers.
-
Product
Thickness Measurement Products
-
Our film thickness measurement products are available for every application. We stock most of the products listed below for fast delivery. Browse through them or contact one of our Application Engineers, who can immediately assist you with your film thickness measurement needs.
-
Product
Radiometer Spectral sensitivities precisely adapted to the measurement task
UVS-B-T
-
Compared to the spectral response of the UVS-E, the UVS-B-T has a sharper cut-off at the transition from UV-B to UV-A. This feature reduces the UV-A contribution to the radiometer output and permits the highest possible correlation to atmospheric UV-B irradiance.
-
Product
Level Measurement
-
Omega provides contact and non-contact instruments for liquids, and non-contact instruments for solids. Choose from continious measurement or point level measurement with one of our level switches.
-
Product
In-fuse Vehicle Current Measurement System
Sens-X
-
Sens-X intelligent sensors offer a range of high dynamic range sensor hardware for the capture of specialist current measurements.
-
Product
High Rotational Speed Measurement Handheld Digital Tachometer
HR-6800
-
The HR-6800 is a non-contact type handheld digital tachometer, which can measure the high speed rotational speed at Max. 999,990 r/min with high accuracy.
-
Product
Measurement Of Straightness, Flatness, Positioning Uncertainty Of Round Tables
RTM - Measurement Of Positioning Uncertainty Of Indexing Tables
-
Optik Elektronik Gerätetechnik GmbH
RTM is a software for the measurement of positioning uncertainty of indexing tables using an electronic autocollimator and a polygon mirror as angle reference.
-
Product
Custom Test & Measurement
-
Delserro Engineering Solutions
DES provides customized bench test and measurement services. After conducting the test, we have the tools and experience to analyze the data and offer solutions to your problems. All of our instruments are maintained and calibrated traceable to NIST standards.
-
Product
Humidity Measurement
-
The following range of devices represent those that have been selected as being suitable for use in Humidity Measurement applications.
-
Product
Measurement Of Straightness, Flatness, Positioning Uncertainty Of Round Tables
ELCOLEVEL - Software For 3D-straightness Measurement
-
Optik Elektronik Gerätetechnik GmbH
ELCOLEVEL is a software with interfaces to electronic autocollimators and inclination levels of different manufactureres. This allows for example the 3D-Straightness measurement (twist-, roll- and yaw-angle) of slides in one and the same measuring procedure.
-
Product
Resistance Measurement
-
Precision resistance measurement equipment for a range of applications. Specialist units measure down to fractions of a micro-ohm with high accuracy.
-
Product
50KHZ MEASUREMENT MICROPHONE
M50
-
The M50 is a precision engineered 50kHz omnidirectional measurement microphone ideally suited for acoustical measurements including high-end loudspeaker design and quality control, scientific research, measurements of ultrasonic or subsonic transducers, or any application where an extremely accurate free-field measurement microphone is required.
-
Product
CO2 Air Quality & Differential Pressure Measurement
-
Our Rotronic CO2 and differential pressure instruments complete the PST range of parameters important for environmental monitoring.
-
Product
Current Measurements of PWM or Inverter
DCT-17
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
For measuring DC current comply with watt-hourmeter (split-core type)
-
Product
Additional Test & Measurement Hardware
-
Additional Test & Measurement Hardware by electro-PJP
