-
Product
Turntable Night Vision
-
China Sheenrun Electronics Co.
*Using continuous zoom infrared thermal imaging technology, strong ability to penetrate haze, long detection distance, can search for targets in a large range
-
Product
Tapping Machine
BAS004
-
The BAS004* is used to simulate foot fall noise in a manner that is well controlled and reproducible so that measured results can be replicated and compared with other measurements.
-
Product
Vision Measurement Technologies
-
Some manufacturers of metrology systems utilize one single technology to measure a wide range of components despite the different form factor of each of the components, which can drastically affect the quality of the measurement.
-
-
Product
In-Line Vision & Rejection
-
Customizable 3D, full color, 360-degree Product Quality Inspection Solution that integrates seamlessly into existing production lines to measure multiple quality parameters at speeds of up to 100 objects per second. For advanced process control, each system is equipped with a conveyor, cameras selected for your specific application, and a choice of rejection options.
-
Product
Multispectral Night Vision
-
China Sheenrun Electronics Co.
*Using continuous zoom thermal imaging technology, the image is clear, which can not only search in a large range, but also identify distant targets
-
Product
GigE Vision Camera
MANTA G-507
-
GigE Vision camera featuring the Sony IMX264 sensor, global shutter. Manta G-507B/G-507C is an industrial camera with the high quality Sony IMX264 Pregius series CMOS global shutter sensor. This camera is offered with several modular options.
-
Product
PC-Based Vision
-
GigE based custom cameras and dedicated Vision Application Software license with the flexiblity to install it on your own IPC.
-
Product
Spring Testing Machine
-
This machine is designed to test laminated springs and coil springs. The test is held under laminated springs and coil springs. The Cabinet comprises of the hydraulic unit, the hand wheel of the pump and the release valve handles are outside the cabinet for easy operation. This compact base carrier two fixed upright and four horizontal plates. The first and the third plates with two small uprights from an adjustable frame. The second and the fourth plates are fixed. A square threaded wheel arrangements provided for adjusting the height of the springs.
-
-
-
Product
Vision Standard IP Cores
-
S2I’s Vision Standard IP Cores solutions are delivered as a working reference design along with FPGA IP cores. This minimizes development time and allows for top-notch performance at a small footprint, while leaving enough flexibility to customize the design. Sensor to Image cores are compact and leave enough space in the FPGA for your application.
-
Product
Machine Capability
NC-Checker
-
Metrology Software Products Ltd
We fine-tune your machine tools with automated diagnostics and precise calibration. We leave you with our NC-Checker software so you can benchmark the accuracy of your machine to assess its ongoing capability.
-
Product
Machine Modules
-
JRT Photovoltaics GmbH & Co. KG
Our machine platforms for the production of automotive and electronic components are comprised of standard modules. Tried, tested and GMP directive compliant developed, they form the efficient basis for customized designs.
-
Product
Profile Projectors and Vision Systems
-
Aberlink's revolutionary measurement software provides you with a powerful, yet easy-to-use user interface. This means you can use the Aberlink 2D software on your profile projector or vision system within 15 minutes of being shown the inspection routines for the first time. You will substantially increase the measurement capability of your profile projector and part inspection through-put.
-
Product
PHOTOMASK INSPECTION MACHINE
NEGATIVE FILM
-
Negative film and photomask inspection originated from the extensive use of printed circuit boards. Negative films and photomasks are used in large quantities. The early detection method is to use the "inspection light table" for inspection, which requires too much manpower and material resources, and manual testing may be due to eye fatigue and negligence.
-
Product
Tensile Testing Machine
-
High accuracy of ±1%Three measuring ranges for accurate testing.Easy in operation and maintenance.Incorporate high level technology.Highly Accurate and precise.Modular designAffordableSafe and reliable
-
Product
Precision Machining
-
Several of our facilities have extensive in-house machining capabilities, with high-end automated systems that allow us to maintain strict control over the quality and delivery of our products, as well as managing costs. This means that we don't have to coordinate with outside suppliers or pass on any additional costs to our customers. Our experienced machinists use modern equipment to produce precision parts and components quickly and efficiently, ensuring that our customers receive the highest quality products on time, every time.
-
Product
Machine Condition Monitoring
-
The system enables precautionary interventions to prevent equipment downtime, increasing equipment lifetimes and reducing maintenance costs. Operational reliability, security, and productivity all benefit.
-
Product
In Situ Testing Machine
IST Series
-
Jinan Testing Equipment IE Corporation
*Load meets or exceeds the following standards: ASTM E4, ISO7500-1, EN 10002-2, BS1610, DIN 51221. *Strain measurement meets or exceeds the following standards: ASTM E83, ISO 9513, BS 3846, EN 10002-4. *Safety: This machine shall conform to all relevant European CE Health and Safety Directives EN 50081-1, 580081-1, 73/23/EEC, EN 61010-1.
-
Product
COMET VISION 2.0
CV
-
Software for COMET Dataloggers Sxxxx, Rxxxx, UxxxxM, Commeters Dxxxx and Multiloggers Mxxxx.
-
Product
Human Machine Interface
HMI
-
Ducommun has designed and manufactured Human Machine Interface (HMI) illuminated switches, keyboards, and lighted panels for a diverse array of military and commercial applications. Platforms include the most modern military fighter and transport aircraft, commercial airplanes, helicopters, military ground vehicles, control systems, shipboard, and space applications. Ducommun is a trusted name in the industry for best-in-class product reliability with a deep heritage of success on demanding programs.
-
Product
Torsion Testing Machines
-
Infinity Machine International Inc.
Torsion Testing Machines by Infinity Machine International Inc. - for applications such as open closed laptop machine, testing machine for testing LCD monitor hinge, 360° laptop hinge torsion testing, and more
-
Product
In-Sight Vision Systems
8000 Series
-
This family of ultra-compact, standalone vision systems deliver industry-leading vision tool performance, in the form factor of a traditional GigE Vision camera. Measuring just 35mm x 32mm x 76mm, all In-Sight 8000 series models feature power over Ethernet (POE), and provide the best standalone vision system option for integrating into small spaces.
-
Product
Smart Vision Sensors
-
Easy handling and implementation of efficient check and control tasks as well as vision-guided robotics.
-
Product
Coordinate Measuring Machines
CMM
-
Aberlink offers a wide range of bridge and hexapod CMMs to suit all applications and budgets, enabling the precise measurement of the smallest of components to parts of over 3 metres long and up to 6 tonnes in weight with a wide range of touch-trigger probes and non-contact measurement options. The comprehensive range of CMMs includes 32 standard sizes of both CNC and manual variants. All CMMs are supplied as a complete turnkey package including the Aberlink 3D measurement software, the easiest to use and most intuitive CMM software currently available.
-
Product
DIP Vision Inspection Machine
Optima III
-
Landrex Technologies Co., Ltd.
DIP Vision Inspection Machine
-
Product
CNC Vision Measuring System
Quick Vision Active Series
-
The Quick Vision Series comprises a family of CNC precision measuring machines equipped with an optical unit on which an image sensor is mounted. Non-contact measurement is performed by computer-processing the workpiece images. Since the first release in 1993, this series has been used in various industries including electrical and electronic, medical equipment and pharmaceutical, automotive, and machine parts, to name just a few. Mitutoyo has significantly contributed to quality and productivity improvements for those customers who use our CNC Vision Measuring Systems in measurement of precision parts on their production lines, especially when incorporated in semi-automatic inspection systems.
-
Product
Integrated Vision System
GEVA 312T
-
The GEVA-312T is an integrated vision system complete with a 12” touch screen display, 1.6GHz dual core processor and two Gigabit Ethernet camera ports. The slim-line form factor maximizes control panel real estate for PLCs, motions controllers and non-vision related components. The GEVA-312T is a good choice for customers who are looking for a complete system that is low-cost, expandable and applicable for a wide range of vision applications.
-
Product
Machine and Equipment Testers
-
Is comprehensive tester for the EN 60204 machine directive; it covers all the measurements specified by this directive.
