Chroma ATE Inc.

Product

3-Phase AC Power Source

61700 series

-

Chroma ATE Inc.

61700 series - Chroma ATE Inc.

The Chroma Programmable AC Power Source model 61700 series delivers pure, 5-wire, 3-phase AC power. Unlike the traditional 3-phase AC power source, it includes low power rating models at very low cost. Users can program voltage and frequency, measure the critical characteristics of the output on its LCD display. It delivers the right solution to simulate all kinds of input condition of UUT to be utilized in R&D and QA. It is also suitable for commercial applications from laboratory testing to mass productions. The 61700 supplies the output voltage from 0 to 300VAC and it can be set individually for each phase. Users also can set the phase angle from 0? to 360?. These kinds of function make the 61700 series can simulate unbalance 3-phase power. Because of the wide output frequency from 15 to 1200Hz, it is suitable for avionics, marine and military application. The AC+DC mode extends the output function to simulate abnormal situation when power line contains DC offset.

Product

Automatic System Function Tester

3260

-

Chroma ATE Inc.

3260 - Chroma ATE Inc.

Chroma 3620 is an innovative system handler for high-volume multi-site IC testing at the system level.

Product

Tabletop Single Site Test Handler

3111

-

Chroma ATE Inc.

3111 - Chroma ATE Inc.

The Chroma 3111 is an automated pick & place handling system ideal for small lot engineering samples and/or NPI test development parts.

Product

RF & Wireless Test Solutions

-

Chroma ATE Inc.

Chroma ATE Inc.

Adivic/Chroma Group has been in the development of RF & WIreless test solutions for more than a decade. Take RF Recorder as an example, it has been adapted by all major Japanese & Korean automotive brand names such as Toyota, Mitsubishi, Honda, Hyundai, Daewoo...etc., most of the global IC design houses with DTV chips such as Broadcom, Marvell, MTK...etc., and also defense entities around the world.

Product

AC Electronic Load

-

Chroma ATE Inc.

Chroma ATE Inc.

AC&DC Electronic Loads are design for testing uninterruptible power supplies(UPS), Off-Grid Inverters, AC sources and other power devices such as switches, circuit breakers, fuses and connectors.

Product

High Performance Programmable AC Power Source

-

Chroma ATE Inc.

Chroma ATE Inc.

Your product description goes here.

Product

2D/3D Wafer Metrology System

7980

-

Chroma ATE Inc.

7980 - Chroma ATE Inc.

Chroma 7980 provides accurate and reliable profile information. 7980 adopts new BLiS technology and specially designed platform to achieve 2D/3D nanoscale measurement.

Product

PCBA Pattern Analyzer

A222917

-

Chroma ATE Inc.

A222917 - Chroma ATE Inc.

Chroma A222917 is a multi-functional PCBA main board board signal test device for display. It has ultra high speed LVDS (Low -voltage differential signaling) as image signal analysis core to provide high efficiency and stability test quality.

Product

Electrical Safety Test Solutions

-

Chroma ATE Inc.

Chroma ATE Inc.

Hipot Analyzers with 500VA output rating can be used to test and analyze the withstand voltage of high power and leakage current for the products like motor stators and rotors with high parasitic capacitance. Corona detection can be used for turn-to-turn or turn-to-ground test to avoid winding insulation failure from corona discharge.

Product

PXI SMU/Power Supply Instrument

-

Chroma ATE Inc.

Chroma ATE Inc.

a programmable PXI-Express DPS (Device Power Supply) Card designed for high-accuracy and reliable output power for device test applications. Its compact size, easy level of integration, and high flexibility make the 52310e Series ideal for multi-channel power supplies.

Product

FPD Tester Power Module

67393-120-480

-

Chroma ATE Inc.

67393-120-480 - Chroma ATE Inc.

The 67393-120-480 FPD Tester Power Module is a new generation of small, stable, high reliability AC to DC power supply. It adopts compact mechanical design and uses Chroma FPD Tester for signal input/output that can provide a total solution for testing the signal, control and power of diversified panels.

Product

Photonics Wafer Probing Test System

58635

-

Chroma ATE Inc.

58635 - Chroma ATE Inc.

The advancement of the photonics device technology continues to enable broader and more demanding applications in the industry.

Product

Package Level Test

-

Chroma ATE Inc.

Chroma ATE Inc.

Applicable for burn-in, reliability andlife testingACC and APC control modesIndividual channel driving and measurementDriving current 500mA per channel

Product

PXIe High Voltage Device Power Supply - 2 Channels Per Card, 18-bit Voltage Programming Resolution and Measurement Resolution

33021

-

Chroma ATE Inc.

33021 - Chroma ATE Inc.

Max. 48V DC output with 2 channels per card, 12V-48V independently Programable voltage level, Max. 250mA current per channel

Product

LED Load Simulator

63110A/ 63113A/63115A

-

Chroma ATE Inc.

63110A/ 63113A/63115A - Chroma ATE Inc.

As shown on the V-I curve in figure 1, the LED has a forward voltage VF and a operating resistance (Rd). When using a resistor as loading, the V-I curve of the resistor is not able to simulate the V-I curve of the LED as shown in blue on figure 1. This may cause the LED driver to not start up due to the difference in V-I characteristic between the resistors and the LEDs. When using Electronic Loads, the CR and CV mode settings are set for when the LED is under stable operation and therefore, is unable to simulate turn on or PWM brightness control characteristics. This may cause the LED driver to function improperly or trigger it’s protection circuits. These testing requirements can be achieved when using a LEDs as a load; however, issues regarding the LED aging as well as different LED drivers may require different types of LEDs or a number of LEDs. This makes it inconvenient for mass production testing.