Chroma Systems Solutions, Inc.

Product

Production – High Speed Functional Test Systems

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

Built for production, our high speed functional automated test system is based on our C8000 platform which uses a unique test command optimization technology to prevent sending repetitive control commands to the system hardware devices. This improves system test speed dramatically and, when used with our PowerPro III software, makes it highly efficient as a closed or optimized auto test system.

Product

Medical System

Sentinel III

-

Chroma Systems Solutions, Inc.

Sentinel III - Chroma Systems Solutions, Inc.

The Sentinel III System provides complete Electrical Safety Testing to IEC60601-1 and IEC 60601-2-49 (Multifunctional Patient Monitoring Equipment) in a fully automated fashion. The Sentinel III saves time by scanning patient connections for leakage current without powering down the device.

Product

Power Meters

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

Designed for both single-phase and multiple phase measurements of AC power signals and related parameters common to most electronic products.

Product

Guardian Hipot Analyzer

19055

-

Chroma Systems Solutions, Inc.

19055 - Chroma Systems Solutions, Inc.

Hipot or dielectric withstand testing instruments manufactured by Chroma are used for conducting electrical safety tests on electrical components and products to make certain they are in compliance with IEC, UL, TUV, CSA, EN and other electrical safety requirements. In addition, these instruments are designed for general product or component testing as well as complex medical safety testing (60601-1) ensuring human safety and product reliability.

Product

High Power DC Electronic Loads

63200A

-

Chroma Systems Solutions, Inc.

63200A - Chroma Systems Solutions, Inc.

Chroma High Power DC Electronic Loads provide wider operating voltage and current ranges up to 240kW, sine wave loading, dynamic frequency sweep to 50kHz, digitizing, MPPT, an impressive front panel that tilts, and the highest accuracy available (voltage 0.015% + 0.015% F.S. and current 0.04% + 0.04% F.S.) – all with an incredibly high power density (6kW @4U).

Product

Software

CaptivATE

-

Chroma Systems Solutions, Inc.

CaptivATE - Chroma Systems Solutions, Inc.

CaptivATE test software provides an electrical safety test solution for accurately performing automated hipot, leakage current and functional tests. Testing is made simple and fast by automatically downloading the test setup, conducting the required measurements and outputting the test results. Software supports IEC60601-1 test requirements and IQOQ protocol documentation.

Product

Thermal/Multi-Function Data Logger

51101

-

Chroma Systems Solutions, Inc.

51101 - Chroma Systems Solutions, Inc.

Models with 1, 8, and 64 channels on-line data recording. Multi-sets linked to a PC for hundreds of channels are doableSupports B, E, J, K, N, R, S, and T type thermal couples with ITS-90 defined temperature rangeIndividual channel cold junction compensation withTemperature resolution up to 0.01℃, error down to (0.01% of reading+0.3℃)Voltage full range ±480VDC, ±10VDC; resolution 1mV, 10uV; error down to (0.1% of reading+1mV), (0.015% of reading+100uV)1000VDC channel to channel isolation, full protection for testing points with charge and guarantee for accurate measurementsThermal couple open circuit detectionPC-based operation with powerful software for recording and analyzing data1 and 8 channel models are USB powered. No battery or external power supply is required

Product

Programmable AC Power Source

6400

-

Chroma Systems Solutions, Inc.

6400 - Chroma Systems Solutions, Inc.

The Chroma 6400 series Programmable AC Power Source uses state of the art PWM technology to deliver pure, instrument grade AC power at a very low cost never achieved before. The 6400 AC power source offers maximum rated power for any output voltage from 0 to 300VAC, at any frequency from 45 to 1K Hz. It is not only suitable for commercial applications (47-63Hz), but also for avionics, marine, military applications at 400Hz.

Product

Battery Safety Testers

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

The flexibility of our battery test equipment provides customers a test environment specifically for their application requirements.

Product

Solar

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

This auto test system uses the unique test command optimization technology to prevent the repeating control commands from sending to the system hardware devices. This improves the system test speed dramatically and makes Chroma 8000, which uses open software architecture, highly efficient as a close or optimized auto test system.

Product

Guardian Multi-Channel Hipot Tester

19020

-

Chroma Systems Solutions, Inc.

19020 - Chroma Systems Solutions, Inc.

The Guardian 19020 enables users to save space on the production line since there is no need to purchase multiple Hipot testers. Its one time multi-channel test can increase the efficiency of electrical regulatory testing. It improves productivity and reduces the risks of testing for products that require only hipot testing.

Product

Guardian Hipot Analyzer

19056/19057

-

Chroma Systems Solutions, Inc.

19056/19057 - Chroma Systems Solutions, Inc.

Chroma’s Guardian 19056/19057 Hipot Analyzer is specially designed for testing and analyzing ultra-high withstand voltage. The series of models include 10kVac / 12kVdc / 20kVdc with maximum AC20mA / DC10mA output that can perform AC / DC withstand voltage and insulation resistance tests with contact check during production line test.

Product

LCR Meters

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

Inductance (L), capacitance (C), and resistance (R) measurement of components during R&D, production, QA, and incoming inspection.

Product

Milliohm Meter

16502

-

Chroma Systems Solutions, Inc.

16502 - Chroma Systems Solutions, Inc.

Basic accuracy : 0.05%Pulsed test current output mode is used to reduce thermal EMFs affection on milliohm measurementDC test current output mode is used to fasten measurement speed for inductive DUTDry-circuit test current output mode (limited Max. 20mV) is used to measure such contact resistances where the maximum open-circuit voltage must be limited to 50mVTemperature correction (TC function) regardless of material or temperatureUseful temperature conversion function for motor/ coil evaluation4 channels R scan with balance check function for fan motor (combined with A165017 option)0.001mΩ~1.9999MΩ wide measurement range with 4½ digits resolutionStandard RS-232 interfaceOptional GPIB & Handler interfaceBin-sorting functionComparator and pass/fail alarming beeper functionLarge LCD display (240 x 64 dot-matrix)Friendly user interface

Product

100Hz-50kHz LCR Meter

Chroma 11021/11021-L

-

Chroma Systems Solutions, Inc.

Chroma 11021/11021-L - Chroma Systems Solutions, Inc.

The Chroma 11021/11021-L are the most cost-effective digital LCR Meters, providing 100Hz, 120Hz, 1kHz, and 10kHz test frequencies for the 11021 and 1kHz, 10kHz, 40kHz, 50kHz test frequencies for the 11021-L. Standard RS232 interface, optional GPIB & Handler interface, high speed and stable measurement capabilities enable the Chroma 11021/11021-L can be used for both component evaluation on the production line and fundamental impedance testing for bench-top applications.