Product

Shear Beam Force Sensors For Pull/push Direction

-

INELTA Sensorsysteme GmbH & Co. KG

INELTA Sensorsysteme GmbH & Co. KG

Inelta Force Sensors operate with foil strain gauges

Product

Life Cycle & Fatigue Testers

-

Banair

Banair

Switches can use all these operations. Membrane switches, keyboards and keypads will all require a push with a known force. On/Off switches will combine a push and a pull or possibly push on, push off. A rocker switch and toggle switches will require a push in two different places. Rotary switches (and volume controls, potentiometers) need to be rotated clockwise and counter clockwise The standard life cycle and fatigue tester the B886 Simon System has been designed for life cycle and fatigue testing of switches, membrane switches, keyboards and keypads. It contains all the components needed to life and fatigue test a products that need to be pushed. We can also supply different actuators for a push, pull, rocker, toggle, volume control or rotary switch.

Product

EMC-Gasketed Front Panels

-

VECTOR Electronics and Technology, Inc.

VECTOR Electronics and Technology, Inc.

EMC Front panels are designed to mount 3U, 6U and 9U Eurocard size PCBs to front panels. Applications with high connector pin counts, where high insertion/extraction force needed. They are fitted with EMC gasket that interfaces with adjacent panels to create RFI shield and does not snag when adjacent cards are extracted.

Product

Ball Pressure Test Apparatus

CX-Q03

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-Q03 - Shenzhen Chuangxin Instruments Co., Ltd.

The Ball Pressure Apparatus is used to check the integrity of dielectric materials by exerting 20N force. The BPA10 is called out in IEC 60335, 60950, 61010, UL, CSA and European Norms. It is used to check the integrity of dielectric materials by exerting 20N force. The Ball Pressure Apparatus is made of stainless steel for long life. Since accelerated life procedures are used for this oven test, more than one apparatus may be useful for parallel testing.

Product

900 Micron Buffer Fiber Thermal Stripper - TFS-900-250

-

Shanghai Fibretool Technology Co.,Ltd.

Shanghai Fibretool Technology Co.,Ltd.

TFS-900 900um buffer thermal stripper design small, lightweight, easy to use and reliable, longitudinal peel, peel force is small, the high quality of stripped fiber; blade durable and easy to replace, using linear bearing guide and thermal stripping to ensure no damage to the fiber, easy to strip coating, stripping speed and other characteristics. With the fixture using the strip dual core optical fiber

Product

Solid State Broadband High Power Amplifier

Model 2215

-

Empower RF Systems, Inc.

Model 2215 - Empower RF Systems, Inc.

The 2215 is suitable for octave bandwidth high power CW, modulated, and pulse applications. This amplifier utilizes high power GaN devices that provide wide frequency response, high gain, high peak power capability, and low distortions. Exceptional performance, long-term reliability and high efficiency are achieved by employing advanced broadband RF matching networks and combining techniques, EMI/RFI filters, and all qualified components. The amplifier is constructed within a single 5RU drawerincluding the forced air-cooling. Available operating voltage configurations are single-phase 220 VAC up to 400 Hz and 28 VDC.

Product

Dynamometer

-

Gigasense

Gigasense

The PIAB Dynamometer is excellent for measurement and control of tension forces and weight, where accuracy, reliability and safety in all conditions is required. The PIAB Dynamometer conforms to the International Standards for Safety Inspectorates. The PIAB Dynamometer is an all-weather instrument, equally suitable for use in the laboratory as in the field for weighing and measuring mechanical tension forces.

Product

350W to 420W - Single Output

CUS350M Series

-

TDK-Lambda Corp.

CUS350M Series - TDK-Lambda Corp.

*IEC60601 3rd Ed. (2 x MOPP)*High Efficiency, up to 94%*350W Convection, 420W Forced Air Rating*Low profile (1.6")*Low off-load power draw (<0.5W)*5V Aux & 12V fan supply (/F suffix)*BF rated

Product

Land

-

General Dynamics Global Imaging Technologies

General Dynamics Global Imaging Technologies

Developing agile solutions for our soldiers is paramount. We are constantly perfecting our ground game, delivering tools that earn the confidence of those in command. By providing mission-critical situational awareness and real-time information, gathering intelligence and reconnaissance, vital information is always at-hand for our partners in the armed forces.

Product

Universal SOIC-to-0.600 [15.24] DIP Adaptor

Series 647

-

Aries

Series 647 - Aries

Universal SOIC to .600 [15.24] DIP Adapter. 44 pin adapter for mounting Aries Series 547 Universal SOIC ZIF (zero insertion force) Test Socket to .600 [15.24] DIP PCB layout. Consult Data Sheet No. 10015 for test socket information.

Product

Atomic Force Microscope

NaioAFM

-

Nanosurf

NaioAFM - Nanosurf

The NaioAFM is the ideal atomic force microscope for nanoeducation and basic research on small samples. This all-in-one AFM system provides solid performance and easy handling, with a price tag and footprint that fit anyone and any place.

Product

Wire Crimp Pull Tester (Motorized)

WT3-201M

-

Mark-10 Corp.

WT3-201M - Mark-10 Corp.

The WT3-201M motorized wire crimp pull tester is designed to measure pull-off forces of up to 200 lbF [1 kN] for wire and tube terminations. The tester conforms to numerous UL, ISO, ASTM, SAE, MIL, and other requirements for destructive testing. Non-destructive testing is also possible, such as pulling to a load or maintaining a load for a specified period of time, as per the requirements of UL 486A/B. Programmable pass/fail limits with red and green indicators and audio alerts help identify non-conforming samples.

Product

PCX Multimeter Test Leads Clip

-

Parrot Invent

Parrot Invent

- The PCX Parrot Clip model is aimed to be used mainly for multimeter test leads.- When is hand held, is a handy device giving comfort to the operator.- The PCX Parrot Clip model is effective for direct point, hands-on measurements.- It has a length of about 130 mm so that it points with the metal tip places rather crowded with electronic components.- The PCX provides also reliable hands-free connections.- Even that is rather long the PCX model is not heavy, and therefore the weight of the probe is not affecting and forcing the connection.

Product

Signal Conditioner in DIN Rail Housing

Series IMA2

-

INELTA Sensorsysteme GmbH & Co. KG

Series IMA2 - INELTA Sensorsysteme GmbH & Co. KG

For LVDT Displacement Sensors, DMS Force Sensors and potentiometric Sensors

Product

DMS Transmitter

-

Knick Elektronische Messgeräte GmbH & Co. KG.

Knick Elektronische Messgeräte GmbH & Co. KG.

Transmitter for load cells and the evaluation of strain gages in 6 mm housing with calibrated range selection.Detection signals from sensors for physical variables such as displacement, angle, pressure or force. Functional safety up to SIL 2, SIL 3 redundant to parameterization via interface or intuitively, directly on the device. Universal use with 24 V DC or AC power supply.

Product

Force Measurement Systems

-

Tekscan, Inc.

Tekscan, Inc.

Tekscan's load & force measuring systems answer market needs for an economical test & measurement tool.

Product

TLP Probe Arm Kit

TPA-95

-

High Power Pulse Instruments GmbH

TPA-95 - High Power Pulse Instruments GmbH

*Flexible pulse force, pulse sense combined TLP probe arm kit based on TPA-95L and TPA-95R*Compatible with typical standard micropositioner mechanical interfaces*4.7 kΩ pulse sense voltage divider, which results in a voltage transfer ratio of (4700 + 50)/50 = 95 : 1 into 50 Ω*Variable probe pitch configuration*1 m flexible 50 Ω cables with SMA connector for pulse sense*0.1 m flexible 50 Ω cables with SMA connector for pulse force*Tungsten probe tips*Can be used for chuck backside grounded TLP measurements

Product

UL496 Lampholders Screw Torque Tester

CX-DZN

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-DZN - Shenzhen Chuangxin Instruments Co., Ltd.

Lampholders Screw torque tester is strictly designed according to UL496 etc. It's mainly used to the screw lampholder torsion test of protecting accidental force.

Product

Fracture Testing Machines: Automation

-

ZETLAB Company

ZETLAB Company

The digital sensors are used for the purpose of tests automation. The sensors measure the applied force value and the changes in linear dimensions of the specimen.

Product

Electric Vertical Test Stand

WDW-L series

-

Jinan Testing Equipment IE Corporation

WDW-L series - Jinan Testing Equipment IE Corporation

Electric Vertical Test Stand is a tensile compressive test stand especially designed to match push-pull force gauge. This series pf electric vertical test stand has good stability, wide application range and is convenient to use. The electric vertical test stand has stepless speed-adjusting uniform motion, digital display of the testing speed and converting mode between manual and automatic operation. The vertical test stand is specialized for tension/compression test, insertion/withdraw test, fatigue test and fracture test.

Product

XCITE 1100 Laboratory Series

-

Xcite Systems Corporation

Xcite Systems Corporation

The Xcite 1100 Laboratory Series is the most popular of the Xcite product line because of its large force capacity and broad frequency range compared to its extremely compact size. The 5 GPM 3-Phase hydraulic power supply used in the system provides a high level of low frequency displacement response for testing system subassemblies and non-linear structures such as suspensions and elastomeric dampers. The small piston area of the exciter and the high performance servovalve combine to provide excitation to over 1000 Hz allowing structure borne noise path evaluations.

Product

NanoLattice Pitch Standard (NLSM)

-

VLSI Standards, Inc.

VLSI Standards, Inc.

The NanoLattice™ (NLSM) 100 nm pitch standard utilizes gratings with near perfect periodicity to calibrate magnification and scan linearity of CD-SEM and Atomic Force Microscopes (AFM). Make the grade, with the only pitch standard of its kind available below the 130 nm node.

Product

ICT Probes

Merica Series-MPAL50

-

Merica Technology Ltd

Merica Series-MPAL50 - Merica Technology Ltd

Minimum Center: 1.27(50mil)Current Rating: 3amps, continuousCurrent Resistance: 60milliohmsFull Stroke: 6.35mmRated Stroke: 4.30mmSpring Force: 185/227gf(7/8oz)

Product

HEXAGON MI _ CNC Precision Coordinate Measuring Machines

CROMA

-

Attotech Co., Ltd.

CROMA - Attotech Co., Ltd.

All aluminum structure combined with hard anodized aero metal for cross beam and z axis ensures temperature consistency. Reduces mass of moving parts and force of inertia, Hence ensures high accuracy during high speed movement.