Product

GAOTek Three-Channel Leakage Current Tester

GT00YB00ZV

-

GAO Tek Inc.

GT00YB00ZV - GAO Tek Inc.

The GAOTek Three-Channel Leakage Current Tester provides online measurement, monitoring, and recording of three channel AC leakage currents simultaneously by adopting the latest CT and magnetic shielding technology. This instrument provides highly accurate and reliable measurements. Additionally, it can locate insulation faults and repair electrical lines. It is composed of a special alloy and consists of a test monitoring software, current clamp, and communication cable. The instrument can store 3900 sets of data and enables online and real time monitoring, historical data inquiry, read, inquire storage, generation, and printing of a fitting curve. It is widely used in 380/220 power systems. It complies with IEC1010-1, IEC1010-2-032, Pollution Class 2, CAT Ⅲ (600 V), and IEC61326 (EMC standard) safety codes.

Product

Plug'N Check

PH-320/300

-

Pansco, Ltd

PH-320/300 - Pansco, Ltd

The plug‵N′check is our easiest-to use cable tester yet.  Simply plug in both ends of a cable, and the easy-to-read LED display explains the cable type and checks whether cable is faulty or good automatically.  A shield LED shows results of the shielding check and battery low indicator saves you from misreading the tester in case of low power.  Will make work shorter and easier for the layman and the professional alike.  Especially suited for installation and maintenance of residential networks.

Product

Downconverter for the 21cm Bandvalon

2100

-

Valon Technology, LLC

2100 - Valon Technology, LLC

1440MHz inputLow noise figure LNA 0.3dB 20 KHigh gain >40dB8-pole ceramic dielectric input filterHigh dynamic range, low-spurious responses  Rugged milled aluminum housingRFI shielded constructionDesigned for use with Valon 5009 as LOSuitable for hydrogen line observation and general radio astronomy in the 21cm band.6Vdc @ 400mAIncludes 20” dc power supply cable

Product

Chassis

-

Holding Informtest

Holding Informtest

Infrastructure housing for instrument cards typically containing a power supply, cooling fans and emi shielding.

Product

High Temperature Self-Supporting Furnace Extensometers (1200 C)

Model 3448

-

Jinan Testing Equipment IE Corporation

Model 3448 - Jinan Testing Equipment IE Corporation

Epsilon developed this unique high temperature extensometer for testing metals, ceramics, and composites at the high temperatures produced by furnaces and induction heating systems. A combination of features make these extensometers easier to use and better in performance than other similar high temperature extensometers.The units are held on the specimen by light, flexible ceramic fiber cords. These make the extensometer self-supporting on the specimen. No furnace mounting brackets are required. The side load on the test sample is greatly reduced because of the self-supporting design and light weight of the sensor. Most materials testing furnaces with a side cut-out for an extensometer will readily accept a Model 3448. For induction heating systems, a different ceramic cord placement allows the extensometer to easily pass between the coils.The combination of radiant heat shields and convection cooling fins allow this model to be used at specimen temperatures up to 1200℃ (2200°F) without any cooling. An optional tiny air fan does enhance stability at the highest temperatures and is recommended for the highest accuracy and for tests with small elongations. The fan comes with a magnetic base for support so it can be mounted at any convenient location near the extensometer. Fan cooling is not generally needed for induction heated systems. High purity alumina ceramic rods are used. These are available in lengths as required to fit your furnace. A spare set is included with every extensometer. Specify chisel, vee chisel or conical contact points as desired.Most units operate equally well in tension and compression. Thus tensile, compression and cyclic tests like low cycle fatigue can all be performed with a single unit.For vacuum furnaces, special models are available. Epsilon can also provide a radiant heat transfer cooled version. This requires that the extensometer module be surrounded by a water cooled enclosure with a front slot for the ceramic rods.

Product

Passive Splitter for CATV/SATV

HGS01

-

Hangzhou Huatai Optic Tech. Co., Ltd.

HGS01 - Hangzhou Huatai Optic Tech. Co., Ltd.

*Zinc alloy die-casting chassis, surface with tin plating treatment.*Frequency range: 5-2400MHz. *Shielding degree 40-450MHz ≥ 75dB, 450-860MHz ≥ 65dB, 860-2400MHz ≥ 75dB. *All ports can be passed by maximum voltage: 24V, maximum current: 1A. *75Ω British F-type connector.

Product

Mini-ITX Embedded Boards

-

ADLINK Technology Inc.

ADLINK Technology Inc.

Industry trends indicate that users require a smaller and lower cost solution for their system requirements. Mini-ITX has a smaller board size and lower keep-out zones to enable a reduced chassis size for systems placed on the user’s desk, mounted on a display, or installed in space-restrictive environments. In addition to deployment in smaller chassis designed around the Mini-ITX form factor, these boards are compatible with ATX and microATX chassis without the need to retool the I/O shield. Mini-ITX embedded boards are ideal for applications in industrial automation, self-service kiosks, and other infotainment driven solutions.

Product

Mini AC Leakage Current Clamp Tester

M-104+

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

M-104+ - MULTI MEASURING INSTRUMENTS Co., Ltd.

・33mmφCT window and ultra compact size.・Data-hold function. Especially useful when working in dark or hard to get areas.・Low cost type, Core shielding is not equipped.

Product

Shielded Chambers

-

EMCTEST

EMCTEST

GTEMCELL Ltda shielded chambers are built up as a modular construction. Due to individual modules any size of chamber can be realized. Big chambers may require an outer supporting structure or alternatively the shielding material can be attached direct to the building.

Product

EPON OLT

OLT-E4A

-

Hangzhou Softel Optic Co., Ltd.

OLT-E4A - Hangzhou Softel Optic Co., Ltd.

OLT-E4A is outdoor type EPON OLT product. This product using aluminum alloy die casting shaping, has good heat dissipation and shielding effect. The features of the OLT are convenient, flexible, easy to deploy, high performance. It is appropriate to deploy in a outdoor environment.

Product

Loop Antennas

-

A.H. Systems, Inc.

A.H. Systems, Inc.

A.H. Systems' designs, manufactures and delivers high performance Loop Antennas for a wide range of magnetic field testing. Whether used in a set to measure shielding effectiveness per MIL-STD 285 and NSA 65-6 or individually to satisfy specific requirements,

Product

Antenna, Loop

EM-6879 | 10 KHz – 30 MHz

-

Electro-Metrics Corp.

EM-6879 | 10 KHz – 30 MHz - Electro-Metrics Corp.

The EM-6879 Loop Antenna is used for magnetic field measurements over the frequency range of 10 kHz to 30 MHz. The EM-6879 is designed for use with any 50 ohm Receiver System. The antenna has a balanced Faraday shield that reduces its response to electric fields to a vanishingly small amount so that it can produce a practically pure magnetic field response.

Product

Standard Round 2m Cables, Shielded, for Higher Current

ST010-S

-

TEAM SOLUTIONS, INC.

ST010-S - TEAM SOLUTIONS, INC.

Connection to digital boards, intended for higher currents. to be used with CPCI-1500, APCI-1500, APCI-1564, APCI-2032.

Product

Hydrophone

RESON TC 4032

-

Teledyne Marine RESON B.V.

RESON TC 4032 - Teledyne Marine RESON B.V.

The TC4032 general purpose hydrophone offers a high sensitivity, low noise and a flat frequency response over a wide frequency range. The high sensitivity and acoustic characteristics makes TC4032 capable of producing absolute sound measurements and detecting even very weak signals at levels below “Sea State 0”. The TC4032 incorporates an electrostatically shielded highly sensitive piezoelectric element connected to an integral low-noise 10dB preamplifier. The TC4032 preamplifier is capable of driving long cables of more than 1.000 meters, and the preamplifier features an insert calibration facility.

Product

Shield Box

-

Anritsu Corporation

Anritsu Corporation

Anritsu's Service Testers and accessories enable OEM aftermarket service and authorized repair centers to troubleshoot and repair mobile phones and data devices quickly and economically. A full range of accessories are available including shield boxes and automation software to provide scalable test capability to the industry.

Product

Large Size RF Test Enclosure, ≥100 DB Isolation, 300 MHz - 18 GHz

dbSAFE MAX

-

DVTest Inc.

dbSAFE MAX - DVTest Inc.

Some applications require larger test environments. The dbSAFE MAX blends all the superior isolation characteristics of the standard dbSAFE DUO shielded box into a larger volume to guarantee you get better results.

Product

Microwave Coaxial Cable Assemblies

MWX0 series

-

Junkosha Inc.

MWX0 series - Junkosha Inc.

JUNFLON® MWX products are flexible signal transmission lines that take advantage of the remarkable properties of fluoropolymers. They are suitable for use with a wide range of frequencies up to 67 GHz. These products feature low insertion loss and low VSWR, low signal leaks and low interference due to high shielding effectiveness, and higher density wiring for use in the narrow device interiors. Junkosha provides highly reliable products for microwave /millimeterwave applications tailored to customer assembly needs.

Product

Antenna Calibration

-

TDK RF Solutions Inc.

TDK RF Solutions Inc.

TDK Test Services offers testing to domestic and international EMC test regulations, including IEC, ISO, CISPR, and SAE. Test services are offered in our 3m semi-anechoic chamber, 3m fully-anechoic chamber, 10-meter open area test site, and our shielded conducted test chamber.

Product

Mobile Watt Meter

PM2000AM

-

Palstar, Inc.

PM2000AM - Palstar, Inc.

The PM2000AM Mobile measures and displays forward power, reflected power, and SWR simultaneously on it's dual movement meter system in the frequency range. Accuracy of the readings is assured because the PM2000AM features a true shielded directional coupler, that on the mobile version is offered as an external unit. The backlit meter can display either peak or average power readings, and has 300 and 3000 watt range settings.

Product

RF Shielded Test Enclosure, Low Profile

JRE 2214

-

JRE Test, LLC

JRE 2214 - JRE Test, LLC

Like its other brothers in the JRE test line, it features rugged welded aluminum construction with superb RF shielding effectiveness. Long life door gasket material along with double edge engagement not only provides solid RF shielding, but smooth trouble-free operation over its lifespan. Tough 'honeycomb' vent maintains shielding effectiveness throughout the full frequency range. Optional fan is available for additional airflow.

Product

Radiating Comb Generators

TBCG1

-

TekBox Singapore Pte. Ltd.

TBCG1 - TekBox Singapore Pte. Ltd.

The TBCG1 is a radiating comb generator with an internal antenna and a base frequency of 100MHz. It radiates a comb spectrum characterized up to 6GHz. The comb generator is built and characterized to serve as a rough reference for testing radiated noise measurement set ups in anechoic chambers, TEM/GTEM cells, shielded chambers, etc.

Product

2U Family of Programmable AC-DC Switching Power Supplies to 1400W

-

Acopian Technical Company

Acopian Technical Company

The 2U family of programmable AC-DC power supplies sets a new standard for flexible and reliable power for your application. Available in a Rack Mounting or Benchtop at 1400W power levels with single output voltages ranging from 10 to 270V and current capabilities up to 120A. A user-friendly front panel provides reliable linear controls for finer adjustment and digital LED voltage and current meters. Standard features include; 'soft start' operation and 'no load' operation, thermostatically speed controlled fans to limit acoustic noise, short circuit and overload protection, thermal protection, internal EMI filtering, RFI shielding and remote sensing.

Product

Radiometers

-

Dymax Corporation

Dymax Corporation

UV Intensity Meters & Visible Intensity Meter for Light Curing Systems. Dymax UV and visible radiometers are simple to operate and allow operators to monitor and document a UV/Visible light curing process. A low UV/Visible intensity measurement signals an operator to replace the bulb, reflector, or lightguide. Radiometers can also be used to confirm that operators are properly shielded from UV/Visible exposure. Degradation of curing bulbs, lightguides, and reflectors can decrease intensity, resulting in incomplete cures.

Product

DCDC

HA/HP Series

-

Semiconductor Circuits, Inc.

HA/HP Series - Semiconductor Circuits, Inc.

The HA/HP series features the latest in MOSFET design, state of the art surface mount technology, and offers a 4:1 ultra-wide input range, and efficiencies greater than 75% (typ). Features include Pi input filter to reduce input reflected ripple, continuous short circuit protection, and excellent line and load regulation of ±0.25% for line and ±1.0% load. Additional standard features include, 500 Vdc I/O isolation, and an operating temperature range of -25°C to +71°C with no derating. All models are packaged in a six-sided shielded miniature case measuring only 2.0” x 2.0” x 0.375” high.

Product

Field Strength Meters

FIM-22 And FIM-41

-

Potomac Instruments, Inc.

FIM-22 And FIM-41 - Potomac Instruments, Inc.

The Models FIM-22 and FIM-41 are portable field strength meters designed to provide precise, direct measurements of electro-magnetic fields in the 200 kHz to 5.0 MHz spectrum. These units include a receiver, integral shielded loop antenna, precision attenuator, internal calibration source, and battery power supply. With calibration accuracy traceable to the National Institute of Standards and Technology, the FIM-22 and FIM-41 meet the most exacting requirements of government and industry. Their hinged covers, on the rugged drawn aluminum cases, contain a loop antenna. Opening the cover to a vertical position connects the antenna terminals to the receiver via maintenance-free gold-plated contacts. An interlock switch prevents inadvertent battery discharge when the cover is closed.