Product

Precision Industrial Ovens

ACE-9023A

-

ACE Technology

ACE-9023A - ACE Technology

The ACE-9023A Forced air drying oven is mainly used for scientific research units, specialty universities, laboratories, industrial mining enterprises etc and production field for materials drying and heat treatment.

Product

Load Monitoring Units (LMUs)

-

Magtrol Inc.

Magtrol Inc.

Magtrol's Load Monitoring Units are used for measuring load, force and weight from signals generated by strain gauge transducers. Specifically designed for use with Magtrol's Load Measuring Pins and Load-Force-Weight Sensors, the LMU Series provides excitation voltage while conditioning the bridge output signal. Each unit contains DIP-switches and jumpers for greater flexibility and complete adaptability

Product

Force Testing

-

Mecmesin Limited

Mecmesin Limited

Force testing is a way of determining how an object will react when it is subjected to tensile or compressive loads

Product

Auto Tensile Tester

ATT-01A

-

Jinan Leading Instruments Co., Ltd.

ATT-01A - Jinan Leading Instruments Co., Ltd.

ATT-01A Auto Tensile Tester is applicable in the test of physical mechanical properties of plastic films, laminated materials, adhesives, adhesive tapes, adhesive bandage (plaster), release paper, protective film, leather, rubber and paper fiber, etc. It can perform the test items of tensile, peeling, deformation, tearing, heat seal, adhesive, open force, etc.

Product

Robust Stability Meter

MR 1012 S

-

Schuetz Messtechnik GmbH

MR 1012 S - Schuetz Messtechnik GmbH

Owing to its high measuring rate, its compact and robust design, ist accuracy and long-term stability, the digital ohmmeter MR1012S can be used in applications with high requirements concerning the measuring stability and reliability. This is guaranteed by the integrating measuring method according to the quotient principle, the compensation of all thermoelectric forces and other offset voltages, as well as the suppression of interference voltages in the measuring and data lines induced e.g. by HF.

Product

Autoinjector Testing System

-

Instron

Instron

Instron’s Autoinjector Testing System is designed to perform full functionality testing on a wide variety of drug delivery devices, including safety syringes and both needle shield and button-activated formats. Developed in collaboration with pharmaceutical manufacturers and CDMOs, the system captures essential performance requirements such as activation force, injection time, dose accuracy, needle depth, and click detection. It supports compliance with international standards like ISO 11608 and can be configured for integration with collaborative robots to enhance automation and throughput.

Product

Hardware/Software for Increased Production

VibLink & NavLink

-

Seismic Source Co.

VibLink & NavLink - Seismic Source Co.

The VibLink system - Each vibrator, plus the central recorder, is equipped with a VibLink module. The VibLink module uses advanced TDMA techniques to multiplex seven vibrators and the doghouse on one radio channel. And does this all in one second windows. With additional Vibrators, additional seconds are added. The Universal Encoder 3 uses its time slot to send out status updates and request PSS/PFS data. Each Force 3 controller uses its time slot to send out its location, status, and QC Information.

Product

Sensors

-

Com-Ten Industries

Com-Ten Industries

Com-Ten offers a wide range of sensors to suit your different applications. Force and torque sensors of various capacities and sizes, combined to wired and wireless measurement displays, we can offer you a solution for your testing needs.

Product

Motor Starting & Control Resistors

-

Hilkar

Hilkar

Motor Starting Resistors are used to reduce the voltage at the motor terminals and also decrease the starting current. Motor Starting Resistors are necessary because the self resistance of a motor armature is very low. When the voltage is first applied, excessive current will flow. For limiting this current, since there will be no resisting back electromotive force (emf),some series resistance can be added to the armature windings.

Product

19-inch Rack Mount(2U) 20 Watts 80MHz to 1GHz Power Amplifier

-

Chengdu KeyLink Microwave Technology Co., Ltd.

Chengdu KeyLink Microwave Technology Co., Ltd.

20 Watts 80MHz to 1GHz amplifier in a compact 2U package for oversea market. It is a rack mountable-unit incorporating a universal voltage power supply and a built in forced air-cooling system. This amplifier subsystem utilizes LDMOS power device that provides excellent power density, high linearity, low distortion and wide dynamic range. The KB00810S43A SSPA is ideal for EMC testing to various industry standard as well as Broadband Communication.

Product

S-Beam Static Load Cells

2519 Series

-

Instron

2519 Series - Instron

The 2519-xxxN Series load cells are specifically designed for use with 3300 single column testing systems. Automatic transducer recognition and electrical calibration makes them easy to use. The load cells incorporate overload protection and can withstand loads up to 150% of their force capacity without damage and 300% without mechanical failure. The load cells allow the user to zero out the tare weight of a grip or fixture that weighs up to 40% of the force capacity, while still maintaining the full specified accuracy.

Product

Rheology

-

TA Instruments

TA Instruments

Rheology is the study of flow and deformation of materials. Deformation and flow are referred to as strain or strain rate, respectively, and indicate the distance over which a body moves under the influence of an external force, or stress. For this reason, rheology is also considered to be the study of stress-strain relationships in materials.

Product

Custom Solutions

-

FEI-Zyfer Inc.

FEI-Zyfer Inc.

FEI-Zyfer has designed, developed and delivered solutions to meet the needs of local, state and federal government civil and law enforcement agencies, satellite communication providers, the U.S. armed forces, natural resource extraction industries, and many other time and frequency users with difficult and critical requirements. Let FEI-Zyfer provide the answer you’re looking for today.

Product

Automated ANSI Meter Tester

4 Series

-

Powermetrix Systems

4 Series - Powermetrix Systems

The PowerMaster® 4 Series Automated ANSI Meter Tester boasts many features that make it the most functional, versatile, and user-friendly meter tester on the market today. It is a closed-link meter testing solution that sources current up to 30A or 50A (depending on model) and operates on all voltages up to 530V with no switch changes required. Our automatic meter testing equipment also facilitates testing of most ANSI socket-based meters using our newly-engineered universal zero insertion force meter socket.

Product

High Precision Compression Type Load Cell

IR

-

JFE Advantech Co., Ltd.

IR - JFE Advantech Co., Ltd.

A high-precision compression-type load cell is a sensor that accurately measures compressive (pushing) forces, designed for applications requiring very tight accuracy and reliability. It works by converting a downward force into an electrical signal, often using strain gauges to measure deformation, and is used in demanding fields like calibration, manufacturing, and medical equipment.

Product

Sensors

-

YUEQING WINSTON ELECTRIC CO., LTD

YUEQING WINSTON ELECTRIC CO., LTD

Expansion sleeve is a keyless connection device, its principle and use is through the action of high strength tensile bolt, between the inner ring and shaft, between the outer ring and the hub of a huge holding force, in order to achieve the keyless connection between the parts and the shaft.

Product

Crane Safety Monitor

CSM

-

Gigasense

CSM - Gigasense

PIAB CSM Crane Safety Monitor is an electronic control unit to be used in overload protection systems. The PIAB CSM evaluates and computes signals from force transducers and can be set for alarm at preset alarm limits. By installing the PIAB CSM, hazards for personnel and material are avoided. The PIAB CSM will also record the operation of the hoist. The PIAB CSM is designed both for indoor and outdoor operation in aggressive and demanding industrial environments.

Product

Dual Accelerometer

M6

-

Seismic Source Co.

M6 - Seismic Source Co.

*Built-in damping and overrange stops*Safe overrange limits*Force up to 2000 G without damage to sensor*Temperature compensated for accurate response over entire temperature range*High slew rate operational amplifiers (1.2 V/usec)*Internal RF shielding on each pin

Product

Force Gauges

-

Morehouse Instrument Company Inc.

Morehouse Instrument Company Inc.

Minimize user error and achieve higher accuracy with Morehouse Digital Force Gauges. These instruments display the applied force value directly and do not need an interpretation table. Morehouse analog Ring Force Gauges can also be upgraded to the new digital system.

Product

Static Jack System

-

Shimadzu Corp.

Shimadzu Corp.

The servo actuator system applies static test force loads on structures at high precision to obtain their mechanical characteristics on an experimental basis.

Product

Measurement Amplifier In Rugged IP65 Housing

-

INELTA Sensorsysteme GmbH & Co. KG

INELTA Sensorsysteme GmbH & Co. KG

For DMS Force Sensors and LVDT

Product

Multi-Spectral Target System

IR-704

-

Infrared Systems Development Corp.

IR-704 - Infrared Systems Development Corp.

The IR-704 system integrates a Blackbody source, Motorized Aperture wheel, Motorized Filter Wheel, High Speed Shutter and High Speed Filter Shutter. The system was designed as a forced air-cooled Multi-Spectral, Multi-Aperture target system for direct integration with collimator / target projection systems, but can also be used as a direct target system.