Product

S-Type Load Cells

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

S-Type load cells are low-cost and high performance side mounted load cells suitable for a number of weighing and general force measurement applications. They come with a 6-foot strain relieved integral cable with pigtail leads that are stripped and tinned for electrical interface.

Product

High 1.73 (49.00) - 8.00 (127.00) High Performance Lead Free Probe

LFRE-1I35-8

-

ECT

LFRE-1I35-8 - ECT

Current Rating (Amps): 6Average Probe Resistance (mOhm): 10Test Center (mil): 75Test Center (mm): 1.91Full Travel (mil): 250Full Travel (mm): 6.35Recommended Travel (mil): 167Recommended Travel (mm): 4.24Mechanical Life (no of cycles): 500,000Mechanical Life Remark: *Ultra High force products may observe slight decrease in cycle life.Overall Length (mil): 1,300Overall Length (mm): 33.02

Product

Quantum-Safe Security

CN6000 Series

-

ID Quantique SA

CN6000 Series - ID Quantique SA

The Centauris CN6000 encryptors may be upgraded to quantum cryptography through the addition of the Cerberis Quantum Key Distribution (QKD) server to ensure that the solutions are quantum-safe for the long-term protection of sensitive data. This also ensures investment-protection of the encryptors. Such quantum cryptography is provably secure, ensures anti-eavesdropping detection and provides long-term forward secrecy against brute force hacking and attacks by quantum computers.

Product

Rack-Mounted Timing Systems

CommSync II Family

-

FEI-Zyfer Inc.

CommSync II Family - FEI-Zyfer Inc.

The CommSync II family of modular systems provide GPS time and frequency outputs to meet your synchronization requirements. All systems include support for multiple input and output modules including 1PPS, IRIG, HAVE QUICK, PTTI, IEEE-1588 PTPv2, low phase noise 1, 5, and 10 MHz sine wave as well as custom outputs.These systems are available with military SAASM MPE-S GB-GRAM, SAASM Force 22E MRU or civilian C/A GPS receivers. Rubidium or OCXO oscillators provide for excellent holdover performance in the event of failure of the reference inputs. In addition, they may be configured as Distribution Time and Frequency (DTF) systems that are synchronized by an external reference. Dual Redundant systems (CommSync II & CommSync II-D) may be configured with two GPS Time & Frequency (GTF) modules and two power supply modules (AC and/or DC power) for redundancy with uninterrupted automatic switchover.

Product

Instrumented Pendulum Impact Testing System

JB(INSTRUMENTED)

-

Jinan Testing Equipment IE Corporation

JB(INSTRUMENTED) - Jinan Testing Equipment IE Corporation

JB-450I/750I Instrumented Pendulum Impact Testing Machine is equipped with high precision instrumented strain-gauged striking edge & high-speed data acquisition system. This instrumented test system can measure the force of a test specimen during an impact event. Then, the instrumented test data can be used to calculate the energy absorbed by the test specimen. In addition, the crack initiation and arrest loads can be used in fracture mechanical models.

Product

Dual Purpose Shakers

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

The Modal Shop’s dual purpose shakers are ideal for both vibration testing of small components and modal analysis. Small and lightweight, yet powerful electrodynamic shakers, the dual purpose line provides up to 110 lbf (489 N) pk sine force across a wide frequency range.

Product

Acceleration Simulation Mode (ASM) Roller Set

ASM-P | VP 230046

-

Maschinenbau Haldenwang GmbH & Co. KG.

ASM-P | VP 230046 - Maschinenbau Haldenwang GmbH & Co. KG.

The ASM-P roller set is used in test centres and is suitable for vehicles with a single driven axle. It was designed for the exact measurement of the exhaust gas behaviour of vehicles during their transient emission test and permits a driving resistance simulation for the exhaust gas tests ASM-5015 and ASM-2525 (Acceleration Simulation Mode) in accordance with the specifications BAR '97. The increased tractive force of its eddy current brake means that the ASM-P is also suitable for power measurements at constant speed and constant tractive force.

Product

Grippers

-

Omega Engineering, Inc

Omega Engineering, Inc

Omega carries a wide variety of pneumatic grippers with a wide range of gripping forces and stroke lengths. We carry mineature or robust models or for clean or harsh environments.

Product

VisualIMPACT Software

-

Instron

Instron

CEAST VisualIMPACT software is designed to control CEAST Pendulums and Drop Tower Series, manage tests and offer a user-friendly interface when using the Data Acquisition System. It records force and absorbed energy data related to impacts, visualizes and helps analyze the results and calculates resilience. The operator is guided through parameters setup by means of tables describing strikers and specimens that are filtered according to the test type and international standard selected. In the case of instrumented tests, many possibilities for data analysis and visualization are made available. The results are shown through comprehensive and customizable graphs and can be filtered by break type (only specimens with a selected break type are shown). Working with groups of test, the software performs a statistical analysis, and the operator can pick and discard single test results. Different measurement units can be selected. It is possible to print reports and to export data totally or partially. Recent improvements include the possibility to set a number of user profiles, including graphic settings, default printing options, advanced parameters for data analysis and so on, switching quickly from one another when looking at results. The introduction of a new Data Acquisition System (CEAST DAS 64K) in the Impact product line has also triggered a number of new capabilities for the SW, which is now able to process a more comprehensive calibration file for instrumented tups and hammers and manage DAS configurations with a wider range of data acquisition channels.

Product

High Temperature XY Planar Biaxial Extensometer 1200 C or 1600 C)

Model 7651

-

Jinan Testing Equipment IE Corporation

Model 7651 - Jinan Testing Equipment IE Corporation

Model 7651 extensometers measure combined in-plane strains in flat cruciform specimens tested in machines capable of simultaneous X and Y (perpendicular) axial loading and on standard flat samples tested in pure tension. All models are capable of bi-directional displacement in both axes and may be used for strain-controlled fatigue testing under fully reversed load and strain conditions at frequencies up to 10 Hz.All 7651 models mount rigidly on the load frame and incorporate slide mounting to bring the extensometer into contact with the specimen. The gauge length is set automatically before mounting on the test specimen, which allows for hot mounting after thermal equilibrium has been reached.These units are specifically designed to eliminate crosstalk between axes and to provide high accuracy, high resolution measurements. They incorporate capacitive sensors for low operating force and include electronics with programmable filtering and multi-point linearization for improved performance and accuracy. The overall design minimizes, and in many cases virtually eliminates, any influence from common lab environment vibrations.These water-cooled extensometers are equipped with high purity alumina rods with conical rod tips for specimen contact when testing to 1200℃(2200°F). Silicon carbide rods are used for the 1600℃(2900°F) high temperature option.

Product

EO/IR Surveillance Systems

-

L-3 Cincinnati Electronics

L-3 Cincinnati Electronics

Multi-sensor systems for perimeter surveillance, security and force protection are available in a variety of lens and sensor combinations, and can be customized to meet any mobile or stationary mission requirement. These systems may be operated independently or in a fully integrated sensor network.

Product

Handheld Raman Spectrometer

IndiRAM Handy Series

-

TechnoS Instruments

IndiRAM Handy Series - TechnoS Instruments

IndiRAMTM Handy Handheld Raman Spectrometer system is an ideal Make In India solution for rapid on-site detection of explosives, narcotics, HAZMAT, pharmaceuticals, and forensic substancesLightweight, accurate, and field-ready — it empowers defence forces, police, customs, and forensic teams with instant, contactless identification of unknown substances. Trusted by Indian agencies for reliable and portable detection in real-world scenarios.

Product

Universal ZIF (Zero-Insertion-Force) DIP Test Socket

Series X55X

-

Aries

Series X55X - Aries

Universal Zero Insertion Force DIP Test Socket. All pin count sockets go into PCB with either .300 or .600 [7.62 to 15.24] centers. Sockets can be soldered into PCBs or plugged into any socket. Socket fits into Aries or any competitive test socket receptacle.

Product

Exchangeable Test Fixture

MA 2112/D/H/S-7/GR228x-15/15

-

INGUN Prüfmittelbau GmbH

MA 2112/D/H/S-7/GR228x-15/15 - INGUN Prüfmittelbau GmbH

Parallel contact stroke: 15 mmContact force max.: 2000 NInterface block required: Test system sideInterface signals max.: 1190Component on PCB: 58 mmPressure frame unit-opening angle: 75Installation height test probe top: 16,0 mmInstallation height test probe bottom: 10,5 mmInstallation height dual-stage test probe bottom: 16,0 mmweight: 17,46 kg

Product

Bench Power Supply, Adjustable, Fixed, 3 Output, 0 V, 32 V, 0 A, 3 A

72-13600

-

Tenma

72-13600 - Tenma

*Triple channel linear DC power supply*Dual channel adjustable & one channel fixed*Constant current & constant voltage operation*Forced ventilation & temperature cooling system*LED digital tube display shows voltage and current simultaneously*Low ripple & low noise, output on/off control*Overload and reverse polarity protection*115VAC/230VAC (50Hz/60Hz) AC input voltage and 0.01% high regulation*12-month limited warranty *view Terms & Conditions for details

Product

UL496 Lampholder Torsion Meter

CX-DTN

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-DTN - Shenzhen Chuangxin Instruments Co., Ltd.

This Lampholder Torsion Test Device is strictly designed according to UL496 etc. It's mainly used to the screw lampholder torsion test of protecting accidental force.

Product

High Temperature Hot Mountable Furnace Extensometers (1200 Cor 1600 C)

Model 3549

-

Jinan Testing Equipment IE Corporation

Model 3549 - Jinan Testing Equipment IE Corporation

The Model 3549 is a major advancement in the design of externally mounted, furnace extensometers. This new extensometer is designed to meet the stringent requirements of strain controlled testing as prescribed in ISO 6892, while introducing many new innovative features that help improve productivity with static testing applications (tension and compression testing) and long term testing such as low cycle fatigue and creep. The overall design reduces any influence from common lab environment vibrations. This unit also incorporates a new feature that allows the user to precisely set the contact force against the test specimen. This allows for even and repeatable contact force, limiting contact force induced errors. This extensometer mounts on a slide bracket (included) that can attach to the load frame of your test system; optional load frame mounting brackets are available. The gauge length for the 3549 is automatically set prior to mounting on the test specimen, which allows for hot mounting after thermal equilibrium has been reached.

Product

Stand-Alone Test Fixture

MA 2013/D/H

-

INGUN Prüfmittelbau GmbH

MA 2013/D/H - INGUN Prüfmittelbau GmbH

Parallel contact stroke: 15 mmContact force max.: 2000 NInterface block required: NoInterface signals max.: 1700Component on PCB: 58 mmPressure frame unit-opening angle: 75Installation height test probe top: 16,0 mmInstallation height test probe bottom: 10,5 mmInstallation height dual-stage test probe bottom: 16,0 mmweight: 22,00 kg

Product

Signal Conditioner

-

INELTA Sensorsysteme GmbH & Co. KG

INELTA Sensorsysteme GmbH & Co. KG

Signal Conditioning of LVDT Displacement Sensors and Force Sensors

Product

Force Plate Logger Sensor

NUL-225

-

Neulog

NUL-225 - Neulog

This module is in fact a weight scale designed for a multi range of purposes. Simply lay a heavy weight on its surface, or activate a forceful pressure against it (like a bouncing ball), and the logger sensor will measure it. But that's not all, once a special set of handles are attached, it can also measure pull pressure rather than just weights and presses.

Product

Force Tensiometers

Sigma 702ET

-

Biolin Scientific

Sigma 702ET - Biolin Scientific

The Sigma 702ET Transformer Oil Analyzer has been specifically designed to guide the user through the measurement of interfacial tension of transformer oil according to relevant standards.

Product

Exchangeable Test Fixture

MA 2111/D/H/S-5

-

INGUN Prüfmittelbau GmbH

MA 2111/D/H/S-5 - INGUN Prüfmittelbau GmbH

Parallel contact stroke: 15 mmContact force max.: 2000 NInterface block required: Test system sideInterface signals max.: 850Component on PCB: 58 mmPressure frame unit-opening angle: 75Installation height test probe top: 16,0 mmInstallation height test probe bottom: 10,5 mmInstallation height dual-stage test probe bottom: 16,0 mmweight: 9,30 kg

Product

XCITE 1200 Laboratory Series

-

Xcite Systems Corporation

Xcite Systems Corporation

The Xcite 1200 Series provides medium levels of force for testing vehicles such as trucks, locomotives, off road construction equipment and power generation equipment such as turbines and generator rotors, stators and bearings. The larger force capability is still coupled with a frequency response in the 500 Hz to 1000 Hz range for modal studies of highly damped and non-linear structures.

Product

Film Shrink Tester

-

Rhopoint Instruments

Rhopoint Instruments

The Hanatek FST Film Shrink Tester is used to measure the effect of temperature on plastic films. The application of heat causes certain plastic films to rapidly contract; this effect can be used to seal and pack many items from food to consumer goods. The shrink effect is due to internal forces locked into the film during manufacture being released by heating, it is also known as linear thermal shrink or free shrink. The amount of shrinkage is dependent on the film type, thickness and sealing temperature. Testing the percentage shrink of a film ensures that it is suitable for a particular packaging application and establishes the correct temperature for that application.