Product

Electrical Test Equipment Calibrators

-

Transmille Ltd.

Transmille Ltd.

The industry leading series provides by far the fastest and safest solution for calibration of Loop, RCD, PAT's and insulation testers.

Product

Standard Handheld Display

TW-3.0-S

-

Dynamic Load Monitoring Ltd.

TW-3.0-S - Dynamic Load Monitoring Ltd.

The TW-3.0-S Standard Handheld Display is a modern, slimline, multifunctional load monitoring device which is unique to DLM. This innovative design is built with the user in mind. It has a large, high quality LCD screen which is optically bonded removing the need for a back light and improving clarity in bright sunlight. For ease of use each handheld can be given a customisable friendly name made visible on the screen to make instant identification possible. This multi featured high precision unit ensures reliable load readings while also being simple to operate. It can be used in conjunction with any DLM manufactured load cell, just look for the d+ logo on our products.

Product

Standard Normally Open

-

Renesas Electronics Corp.

Renesas Electronics Corp.

Is an optically coupled element that combines a GaAs infrared LED on the input side with anormally-open MOS FET on the output side to realize an excellent cost performance.The small, thin package and high sensitivity of this element makes it ideal for battery-driven mobile devices, and its small offset voltage at power-on and good linearity are also make it suitable for controlling micro analog signals.

Product

Power Calibrator And Protection Relay Test Set

CP11B

-

Calmet Smart Calibration Devices

CP11B - Calmet Smart Calibration Devices

Single phase, class 0.02 and 0.05 power quality calibrator up to 120A and 560VAC with programmable power quality parameters. It makes possible to make automatic test of electricity meters, measurement transducers, current transformers and protection relays.

Product

Calibration Kit

N912

-

Copper Mountain Technologies

N912 - Copper Mountain Technologies

*N912 Calibration Kit, * Frequency Range: up to 9 GHz, * Impedance: 50 Ohm, * Connector Type: N-type.

Product

Relay Test Set and Universal Calibrator

CMC 256plus

-

OMICRON electronics

CMC 256plus - OMICRON electronics

The CMC 256plus is the first choice for applications requiring very high accuracy. This unit is not only an excellent test set for protection devices of all kinds but also a universal calibrator.

Product

Open Standard Module (OSM)

ROM-2620

-

Advantech Co. Ltd.

ROM-2620 - Advantech Co. Ltd.

Advantech ROM-2620 OSM 1.1 Computer-on-Module is powered by NXP i.MX 8ULP SoC which includes up to 2 Arm Cortex-A35 cores in combination with one Cortex-M33 real timeprocessor and Vivante GC7000 nanoULTRA/GC328 graphics engine. It provides USB2.0, Fast Ethernet, MIPI-CSI, I2C, SPI, GPIO, PWM and MIPI DSI display for embedded applications

Product

Analyzer Calibration Extender

ACE

-

Kaelus

ACE - Kaelus

The ACE-1000A is a calibration solution that allows customers to self-calibrate their Kaelus PIM analyzers in the field. With successful calibration, ACE will extend your analyzer’s calibration while reducing downtime to less than one hour and increasing productivity by retaining instruments in the field.The Kaelus software guides the user through the calibration process from testing through payment including extending the calibration date of each Kaelus PIM Analyzer to 12 months, and printing the Certificate of Calibration certificate (CoC)

Product

CPSI-S.0 Standard Compliant Peripheral Board Controlled by a PCIe Channel Derived from a Backplane Connector P1

MIC-3811

-

Advantech Co. Ltd.

MIC-3811 - Advantech Co. Ltd.

It is a dual mini-PCIe carrier board with two onboard SIM card holders and mini-PCIe connectors, routed by PCIe and USB2.0 interface. It allows connection with different types of Mini PCIe form factor add on cards like Wi-Fi/3G/4G LTE/GPS/DIO/CAN/ and MVB modules, either full- or half-size style.

Product

Reference Standards

GF333V2

-

Beijing GFUVE Electronics Co.,Ltd.

GF333V2 - Beijing GFUVE Electronics Co.,Ltd.

Standard kWh meter is a reference standard with the characteristics of wide-range, multifunction and high-precision. It has accuracy class of 0.02. By adopting techniques of DSP, embedded system and automatic temperature balancing and other compensation, it has not only advantages of light weight, small size, high precision, high performance, powerful function, original interface, ease-to-use, but also work stability.The product can be widely used in fields of electric energy measuring, electric energy laboratories and other relevant industry, not only in laboratories but also at the industrial field.

Product

Calibration Devices For Spring Impact Hammer

CX-TF06A

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-TF06A - Shenzhen Chuangxin Instruments Co., Ltd.

Calibration Devices for Spring Impact Hammer

Product

Automatic Calibration Function oH Meter

AH-151

-

HORIBA, Ltd.

AH-151 - HORIBA, Ltd.

The pH meter AH-151 with automatic calibration function performs pH measurement by automatically cleaning the electrode with cleaning solution and performing calibration with standard solution, making it possible to drastically reduce maintenance work. In addition, by spraying the calibration solution, the consumption of calibration solution has been reduced. The spray amount of the cleaning solution can also be adjusted according to the condition of contamination, which contributes to cost reductions. With periodic cleaning and calibration, stable and highly reliable pH measurements are possible.

Product

NIST Calibration for D420-A

D420-A-CCNIST

-

Teledyne LeCroy

D420-A-CCNIST - Teledyne LeCroy

- Choice of 4 GHz or 6 GHz bandwidth models- Up to 5 Vpk-pk dynamic range with low noise- ±3 V offset range- Low loading and high impedance for minimal signal disturbance- Ideal for DDR2, DDR3, LPDDR2- Deluxe soft carrying case- Innovative QuickLink architecture- Wide variety of tips and leads-- Solder-In Lead-- Optional Positioner (Browser) Tip-- Quick Connect Lead-- Square Pin Lead-- HiTemp Solder-In Lead

Product

Decade Box, Calibrated W/Data, Resistance, 7, 1ohm to 11.11111Mohm, 1 %

72-7270 CAL D

-

Tenma

72-7270 CAL D - Tenma

The 72-7270 CAL D from Tenma is a resistance decade box. It is ideal for service, prototype and experimental use. This useful tool may be set resistance value from 1 to 11,111,110 ohm in one ohm increments. The decade accuracy is ±1% resistors used throughout. It has weight of 320g/0.70lb and dimension 14.7cm × 11.7cm × 5.5cm (5.79" × 4.61" × 2.16"). It is typically used in general applications, troubleshooting, maintenance, education and vocational training, production line testing, radio and TV services, working standards, research design & develop, physics laboratory work.

Product

Conformance Calibration Standard Test Card for GS1-DataBar Symbol Verifiers

AI-CCS-DATABAR

-

Applied Image, Inc.

AI-CCS-DATABAR - Applied Image, Inc.

This test card is ideal for testing verifiers, scanners, and other GS1-DataBar barcode reading equipment. It also can serve as an excellent training aid to ensure new operators are using the proper methodology and are proven competent in the use of verifiers.

Product

Standard 1.53 (43.00) - 4.00 (113.00) High Performance Lead Free Probe

LFRE-72T20-4

-

ECT

LFRE-72T20-4 - ECT

Current Rating (Amps): 3Average Probe Resistance (mOhm): 15Test Center (mil): 50Test Center (mm): 1.27Full Travel (mil): 250Full Travel (mm): 6.35Recommended Travel (mil): 167Recommended Travel (mm): 4.24Mechanical Life (no of cycles): 500,000Overall Length (mil): 1,700Overall Length (mm): 43.18

Product

Calibrator, Calibrated w/Data, Current, 185 mm, 78 mm, 38 mm

72-6694 CAL D

-

Tenma

72-6694 CAL D - Tenma

The 72-6694 CAL D from Tenma is a current calibrator. It provides quality and accuracy of handheld calibrator of precision current source. It features large LCD display (maximum display counts 1999, 13mm (0.5") digit size). The current calibrator has 006P DC 9V, MN1604/PP3 battery or equivalent alkaline type or heavy duty type power supply. The dimension is 185mm × 78mm × 38mm (7.3" × 3" × 1.5") and weight is 265g/0.58lb (including battery). It has adjustable 0 to 24mA current source, 2 ranges (0 to 19.99mA (0.01mA display resolution, ±(0.25% FS + 1d) accuracy), 0 to 24mA (0.1mA display resolution, ±(0.5% FS + 1d) accuracy).

Product

PXI Standard Programmable Resistor Modules

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

Pickering's PXI Standard Programmable Resistor Modules include fully programmable resistor and potentiometer modules for applications such as sensor emulation that require fine adjustment with a resolution down to 0.25 Ohm. All of our Programmable Resistor Modules can easily be formed to make Programmable Potentiometers by connecting two channels in series, using the unconnected terminals as the A and B connections and the link between the two channels as the wiper connection. For applications with more demanding accuracy and resolution requirements, consider our Precision Programmable Resistor Modules .

Product

Force Calibrating Machines

-

Morehouse Instrument Company Inc.

Morehouse Instrument Company Inc.

Morehouse Universal Calibrating Machines (UCM) are an easy to use, cost-effective, hydraulic force calibration system that lasts for generations. UCMs built in the 1950s are still operating today! The UCM can be used to calibrate both tension and compression instruments in accordance with ASTM E74, ISO 376, and other internationally recognized force standards.

Product

I/Q Signal Generation for Digital Radio Standards

WinIQSIM2

-

Rohde & Schwarz GmbH & Co. KG

WinIQSIM2 - Rohde & Schwarz GmbH & Co. KG

R&S®WinIQSIM2™ was especially developed to easily generate digitally modulated signals on a PC. The graphical user interface allows intuitive operation by offering a convenient way to create standard-conforming waveforms for many configurable digital standards and to generate multicarrier signals and multisegment waveforms. With these capabilities, R&S®WinIQSIM2™ covers a wide range of applications.

Product

Field Strength Calibration Probe

-

Beijing KeHuan Century EMC Technology Co,.LTD

Beijing KeHuan Century EMC Technology Co,.LTD

Three-axis omnidirectional 100kHz～6GHz light transmission.

Product

DC Josephson Voltage Standard

-

Supracon AG

Supracon AG

The system enables a number of calibration and measurement functions for dc voltages:*Calibration of secondary standards*Calibration of linearities and accuracies of dc voltmeters in the measuring range from 0 to ± 10 V.*Extremely exact output of any reference voltages*Direct comparison of two voltage standard measuring systemsNo other measuring system in the world offers such a variety with the highest precision.

Product

Digital Pressure Calibrators & Gauges

-

Additel Corporation

Additel Corporation

While the industries that use digital pressure test gauges have evolved, the need for durable, insightful, and highly functional equipment remains strong. We've built our digital pressure test gauges with environmental accuracy and performance flexibility in mind.